36" Satin Nickel Slide Bar

A 36 inch metal slide bar in Satin Nickel, with a fixed angle hand shower holder that adjusts up or down for the bather's height.

This 36 inch metal slide bar brings a Satin Nickel finish and an adjustable fixed hand shower holder to a planned shower installation. The source lists overall dimensions of 35.44 inches high, 1.56 inches wide, and 3.34 inches deep, and says the length may not be cut down. Mounting hardware is included. A hand shower and valve are not stated as included, and the source does not publish a flow rate, pressure rating, or temperature control for the bar. Follow the finish manufacturer's care directions.

• Metal and Satin Nickel

  The source lists metal construction and a Satin Nickel finish. That combination keeps the visual story focused on a durable metal shower accessory with a coordinated surface, rather than on a separate valve, hand shower, or water-control assembly.

• Check the Dimensions

  Overall dimensions are 35.44 inches high, 1.56 inches wide, and 3.34 inches deep. The source also says the length may not be cut down, so measure the intended installation area and confirm the available vertical fit before ordering.

• Plan the Installation

  This slide bar is planned for a mounted shower installation, and all hardware for mounting is included according to the source. Review the wall location, mounting points, and plumbing layout before installation so the holder sits where the bather can reach it.

• Fit the Hand Shower

  The fixed hand shower holder moves up or down depending on the bather's height. Confirm that the hand shower connection and hose you plan to use are compatible with the holder, and check the fit before the finished wall work is complete.

• Fixed Angle Holder

  The source identifies a fixed angle handshower holder. It describes a positionable bracket for the hand shower, not a separate spray head, so choose the hand shower and hose configuration separately and confirm how the holder supports that setup.

• Flow Is Not Published

  The source does not publish a GPM figure, flow rate, water flow specification, or pressure rating for this slide bar. Confirm the desired flow and pressure at the hand shower and valve system you select, rather than assigning those performance figures to the holder.

• Controls Are Separate

  No handle, lever, cartridge, thermostatic temperature control, mixing valve, or diverter is specified for this accessory. The bar supports a hand shower holder, while the valve and controls for water temperature and routing belong to the shower system selected for the installation.

• What the Source Lists

  The source lists the slide bar, fixed angle hand shower holder, and mounting hardware as the product features. Mounting hardware comes with the listed installation, while a hand shower, hose, or valve is not stated as included, so confirm the complete kit contents before ordering.

• Care for the Finish

  The source does not publish separate care instructions for the Satin Nickel finish. Use the finish manufacturer's care guidance, clean with the approved method, and avoid products that could damage the metal surface or leave water spots on the fixture.

Good to know

• Measure the 35.44 inch height before mounting.
• The source says the length may not be cut down.
• Confirm the hand shower and hose fit the fixed angle holder.
• Mounting installation is required. All hardware for mounting is listed as included; measure the location first because the source says the length may not be cut down.
• A hand shower, hose, and valve are not stated as included.