Kolvern Portelle Swivel Dining Armchair Pair

A pair of swivel armchairs with a bent walnut shell back and Beige faux leather seats, turning 360 degrees on a hidden base between the seat and the legs.

The back and the outer edge of the seat are one continuous piece of kiln-dried, bent walnut plywood, framing the Beige faux leather cushion on three sides. Four angled solid-wood legs meet under the seat at a hidden pivot rather than a pedestal column, so the silhouette stays low and open.

• Bent-wood shell, four-leg base

  The back and the outer edge of the seat are one continuous piece of kiln-dried, bent walnut plywood, framing the Beige faux leather cushion on three sides. Four angled solid-wood legs meet under the seat at a hidden pivot rather than a pedestal column, so the silhouette stays low and open.

• A swivel seat, not a rocker

  Each chair turns a full 360 degrees on the hidden base between the seat and the legs, so you can face the table, then the room, without shifting the chair itself. The legs stay planted; only the seat and back rotate.

• Walnut shell, faux leather seat

  The shell is bent plywood finished in a walnut wood veneer, and the seat, back, and arms are wrapped in Beige faux leather over a foam cushion. The four legs are a matching manufactured wood, stained to the same brown tone as the shell.

• Standard dining height

  Seat height is 19.5 inches, sized for a standard dining table rather than a counter or bar height. Each chair measures 19.29 inches wide and 21.26 inches deep, with 23-inch-tall arms, so measure the clearance under your table's apron before ordering.

• 330-pound weight rating

  Weight capacity is rated at 330 pounds per chair, carried through the kiln-dried wood frame and the brace under the seat rather than through the upholstery. Each chair weighs 18.4 pounds on its own, light enough to reposition around the table by hand.

• Padded seat, low armrests

  The seat and back are filled with a foam cushion under the faux leather, and the armrests sit low enough to slide the chair under most tables without catching. The curved back gives light lower-back support without a separate cushion to lose track of.

• Assembly at home

  Assembly is required, with all tools included in the carton along with the hardware and printed instructions; the listing suggests one person can complete it. Expect to attach the back shell, seat, and four legs to the swivel plate before the chair is ready to use.

• Wipe clean, skip harsh cleaners

  Wipe the faux leather down with a damp cloth for everyday care; the finish is stain resistant and waterproof, so spills wipe up rather than soak in. Dust the wood shell and legs the same way you would any finished wood furniture.

• Ships as a pair

  One order includes two chairs, not one; photos show a single chair so the design and finish are easy to read. Everything needed for assembly, including hardware and instructions, is included in the box, and delivery is free ground shipping to your door.

Good to know

• Each chair is 19.29 inches wide and 21.26 inches deep; you receive two.
• Seat height is 19.5 inches, standard dining height, not counter or bar.
• Rated 330 pounds per chair; each chair weighs 18.4 pounds.
• Required. All tools and hardware are included; the listing suggests one person can complete it.
• The carton holds two chairs. Table and other room pieces are styling only.