1/2" Thermostatic Pressure-Balance Trim with 5 Functions, Antique Gold

A coordinated shower control combines thermostatic and pressure-balance technology with five-function flexibility in a warm Antique Gold finish.

Designed for a 1/2-inch shower valve installation, this trim supports up to five functions, with three independent functions and two able to run simultaneously. The cartridge is included with the trim.

Overall dimensions are 6.25 inches high × 6.25 inches wide × 3.5 inches deep.

The round escutcheon and chamfered cross-style handle, paired with the Antique Gold finish, create the trim's design profile.

• Design profile

  The round escutcheon and chamfered cross-style handle, paired with the Antique Gold finish, create the trim's design profile.

• Installation

  This is a shower valve trim component. The source lists one included valve, one port, three outlets, and a cartridge included with the trim. Confirm the behind-wall valve and plumbing connections with a qualified installer before the wall is closed; the source does not publish a specific rough-in model for this selection.

• Fit and compatibility

  The trim is designed for a 1/2-inch shower valve installation and supports up to five functions. The source describes three independent functions with two able to run at the same time. Verify the existing valve body, outlet layout, and intended shower components before ordering.

• Water flow

  The combined valve design is described as balancing temperature, pressure, and flow in both high- and low-pressure environments. The product specification lists a maximum flow rate of 6.3 without stating a unit. Confirm the applicable plumbing requirements and local supply conditions with the installer.

• Controls and temperature

  Thermostatic and pressure-balance technologies work together in one control point. The source describes temperature memory as a set-and-forget feature, and the trim supports five functions with two able to run simultaneously. Check the valve orientation and temperature setting during installation.

• Materials and finish

  The source specification identifies the material as brass and the selected finish as Antique Gold. The finish gives the round plate and cross-style handle a warm metallic appearance. Because finish behavior can vary by cleaning method and installation environment, follow the supplied product guidance for the finished surface.

• Care

  The source does not publish product-specific care instructions for the selected finish. Use the care guidance supplied with the fixture and confirm any cleaner is appropriate for the finished surface before applying it. Avoid assuming that care instructions for another finish apply to this Antique Gold selection.

• What is included

  The package ships with one trim piece, its cartridge, and mounting hardware, all listed as included in the source assembly information. It also identifies one valve, one port, and three outlets. Review what is in the box and the behind-wall components with the installer before beginning the work.

Good to know

• Designed for a 1/2-inch shower valve installation.
• Overall dimensions: 6.25 inches W × 6.25 inches H × 3.5 inches D.
• The source does not publish a specific rough-in model for this selection.
• Installation is required. Confirm the existing valve body, wall opening, outlets, and plumbing connections with a qualified installer before work begins. The source does not publish a specific rough-in model for this selection.
• This listing is for trim with an included cartridge and mounting hardware. The compatible behind-wall valve body must be verified; the listing does not establish that it is included. Showerhead, tub spout, and plumbing connections are not included.