Wall-Mount Arc-Spout Double-Control Faucet Fixture, Polished Nickel

Wall-mount lavatory faucet trim pairs a curved fixed spout and two lever handles with Polished Nickel, freeing counter space for a clean sink installation.

Wall mounting clears space around the basin and keeps the three-piece trim arranged above the lavatory. The fixed curved spout gives the installation a clean architectural line.

• Wall-Mount Profile

  Wall mounting clears space around the basin and keeps the three-piece trim arranged above the lavatory. The fixed curved spout gives the installation a clean architectural line.

• Three-Hole Layout

  The trim uses three installation holes with 8-inch faucet centers. Confirm the wall opening, center spacing, supply connections, and rough-in access before the wall is closed.

• Rough-In Planning

  The required RH08WM rough valve must be ordered separately to complete the installation. Verify valve compatibility and wall depth with the installation plan before scheduling plumbing work.

• Measured Flow

  The listed maximum flow is 1.2 gallons per minute, or 4.5 liters per minute, at 60 PSI. The figure describes the fixture's rated delivery under the stated pressure.

• Two Lever Handles

  Two lever handles provide separate control points for the lavatory trim. The handles and aerator are listed as included, while the cartridge valve is a separate component.

• Brass Construction

  Brass is listed for the fixture and handle material, pairing a substantial base with a bright Polished Nickel finish. The rigid, fixed spout keeps the profile consistent.

• Installation Fit

  The listed spout reach is 8.63 inches and its height is 2.38 inches, with 8-inch faucet centers. Compare these measurements with the basin and wall layout before ordering.

• What Ships

  The listed package includes the two handles and aerator. The drain assembly or waste and cartridge valve are not included, and the required rough valve must be ordered separately.

Good to know

• Three-hole layout with 8-inch faucet centers.
• Plan the required RH08WM rough valve separately.
• Spout reach is 8.63 inches and height is 2.38 inches.
• Wall-mount installation is required. Plan the three-hole layout, 8-inch centers, wall access, and separate RH08WM rough valve before installation.
• Faucet trim only. Sink, counter, wall finish, rough-in plumbing, drain assembly, and other bathroom items are not included unless specifically listed.