Wall Mount Bridge Lavatory Faucet

A satin nickel wall-mount bridge faucet pairs two cross handles with a swiveling spout, solid brass construction, ceramic disk valve, and 1.2 GPM maximum flow.

This bridge faucet mounts at the wall through two installation holes. Mounting is required, and the source lists mounting hardware, a valve, and a supply line among the included pieces.

• Wall-Mount Install

  This bridge faucet mounts at the wall through two installation holes. Mounting is required, and the source lists mounting hardware, a valve, and a supply line among the included pieces.

• Check Wall Fit

  Use the 8-inch faucet centers and 9.5-inch front-to-back spout reach to plan basin placement. Confirm your wall rough-in and backsplash clearance because no valve model or connection standard is identified.

• Spout Clearance

  The spout stands 5.91 inches high and swivels. Check bowl depth and surrounding clearance so the water stream lands comfortably in the basin and the spout can move as intended.

• Flow and Pressure

  Maximum flow is 1.2 gallons per minute at 60 PSI. A ceramic disk valve governs the water path, so confirm supply pressure and local plumbing requirements with your installer.

• Cross Controls

  Two metal cross handles operate the hot and cold sides. Hot and cold labels distinguish the temperature controls; blend water at the faucet after the wall plumbing is connected.

• Brass and Finish

  The body is listed as solid brass with a satin nickel finish. The metal cross handles continue the finish; use the manufacturer's care guidance and avoid assuming abrasive cleaners are safe.

• Included Hardware

  The source lists handles, a valve, mounting bracket, supply line, and aerator as included. The sink and counter are not included; wall plumbing and installation labor are not listed as included.

• Care and Warranty

  Wipe water from the finish after use and follow the manufacturer's maintenance guidance for satin nickel. The listing states a limited lifetime warranty; review its terms before installation.

Good to know

• 8″ faucet centers and 2-hole wall-mount layout; confirm your rough-in before ordering.
• Allow 9.5″ of front-to-back reach and 5.91″ of spout height above the basin.
• Confirm backsplash, bowl, supply, and wall-plumbing clearance with your installer.
• Wall mounting and installation are required through two installation holes. Confirm the rough-in and water connections with your installer.
• Faucet only. Sink, counter, wall plumbing, and other bathroom items shown are not included.