Polished Chrome Bathroom Sink Faucet

Single-handle lavatory faucet in polished chrome with solid brass construction, ceramic disc control, one-hole installation, and 1.2 GPM flow at 60 PSI.

Designed for one-hole installation, this faucet needs a compatible sink or countertop opening. Confirm the mounting surface, supply connection, and access below the deck before beginning the work.

• One-Hole Installation

  This faucet is designed for one-hole installation. Confirm the sink or countertop has the required mounting opening and follow the installation instructions for the supply connection.

• Fit and Compatibility

  The source diagram shows a 1 1/4 inch mounting opening and G 1/2 NPSM supply connection. Check those dimensions against the existing lavatory rough-in before purchase.

• Single-Handle Control

  The source identifies a single-handle design and a ceramic disc cartridge. It does not specify a temperature-control range, so use the installation instructions to set the hot and cold connections.

• Water Flow

  The source rates this faucet at 1.2 gallons per minute at 60 PSI. That flow figure describes the stated operating point, while actual performance depends on household pressure and plumbing.

• Brass and Chrome

  Solid brass construction supports the faucet body, with a polished chrome finish shown on the selected variant. The finish gives the geometric silhouette a bright, reflective surface.

• Clearance Dimensions

  Use the source diagram when checking basin clearance: overall height is 5 13/32 inches, spout height is 3 1/4 inches, and spout reach is 4 3/8 inches.

• Finish Care

  For day-to-day care, use a soft cloth and finish-safe cleaning routine, avoiding abrasive products that can mark polished surfaces. The source harvest does not publish a detailed care schedule.

• Carton Check

  Package contents are not itemized in the source harvest. Confirm what is in the box and check any included installation instructions before beginning the one-hole installation, especially the parts needed for your supply connection.

Good to know

• One-hole installation; verify the mounting opening and deck clearance.
• Mounting opening: 1 1/4 inch diameter; supply connection: G 1/2 NPSM.
• Spout reach is 4 3/8 inches; check bowl clearance before installation.
• Mounting and installation are required. Confirm the one-hole opening, supply connection, and clearance before work begins, and use a qualified plumber when needed.
• Faucet only. Sink, countertop, and other bathroom fixtures or installation materials are not included unless listed.