Wall-Mount Bathroom Sink Faucet Trim

A wall-mount bathroom sink faucet trim pairs a curved spout and two lever handles with a bright Polished Chrome finish.

The curved spout, two lever handles, and wall-mount arrangement create a balanced focal point above the basin. Reflective Polished Chrome keeps the visible trim crisp, while the 8-inch centers and 9-inch reach give the fixture a defined working profile.

• Design Profile

  The curved spout, two lever handles, and wall-mount arrangement create a balanced focal point above the basin. Reflective Polished Chrome keeps the visible trim crisp, while the 8-inch centers and 9-inch reach give the fixture a defined working profile.

• Installation Planning

  Mounting and installation are required. This trim is designed for a wall-mount setup, so plan the finished-wall opening, basin clearance, water connections, and certified master plumber before work begins.

• Fit and Rough-In

  Three mounting holes and 8-inch faucet centers define the installation layout. A compatible RH08W rough-in valve is required to complete the faucet. Confirm the valve, finished-wall depth, connection locations, and spout reach with your installer.

• Controls and Temperature

  The selected unit uses two lever handles for the hot and cold layout. The rough-in valve regulates temperature and water flow, so confirm the control arrangement and valve compatibility before closing the wall.

• Flow and Certification

  Maximum flow is 1.2 gallons per minute at 60 PSI. The aerator supports the stated flow, and the fixture is listed as EPA WaterSense Certified. Check the available pressure and local requirements for the installation.

• Material and Finish

  The faucet is listed with a brass body, metal handles, rust-resistant durability, and a Polished Chrome finish. Use the fixture's finish-care guidance and avoid abrasive products that could mark the reflective surface.

• What Ships

  The included pieces are the mounting bracket, aerator, and handles. The RH08W rough-in valve is required but not included in this trim listing, and the drain assembly is sold separately. This listing is for the visible trim components.

Good to know

• Confirm the 8-inch faucet centers and three mounting holes before ordering.
• Allow 9-inch reach and 2.13-inch height; check basin and backsplash clearance.
• RH08W rough-in valve required; confirm wall depth and connections with your installer.
• Wall mounting and installation are required across the listed three mounting holes. Confirm the finished-wall rough-in and water connections with a certified master plumber.
• Faucet trim only. Sink, countertop, rough-in valve, drain assembly, and other bathroom fixtures shown are not included.