Wall-Mount Sink Fixture Trim

Wall-mount lavatory trim with two lever handles, solid brass construction, and a living Unlaquered Brass finish. Confirm the rough-in and three-hole layout before installation.

This two-handle wall-mount faucet trim is designed for a three-hole bathroom sink installation with 8-inch faucet centers. It has an 8-inch front-to-back spout reach, 3.88-inch spout height, ceramic disk valve compatibility, hot and cold indicators, and a maximum flow rate of 1.2 gallons per minute at 60 PSI. The Unlaquered Brass finish naturally develops a patina over time.

• Wall-Mount Installation

  This fixture mounts at the wall and requires installation. Plan the rough-in before closing the wall, then use the included mounting bracket to position the spout and handles over the basin.

• Rough-In Compatibility

  The source says the RH08W rough valve must be ordered to complete the faucet. The compatible ceramic disk valve is not included, so confirm the rough-in, valve, water connections, and wall depth with your installer before ordering.

• Sink Fit

  The layout uses three installation holes with 8-inch faucet centers. Measure the basin, finished wall, and backsplash clearance so the spout reaches the drain area comfortably and the handles have room to operate.

• Water Flow

  The maximum listed flow rate is 1.2 gallons per minute at 60 PSI, and an aerator is included. Check household pressure and local plumbing requirements before connecting the supply lines.

• Two Lever Controls

  Two lever handles provide separate hot and cold controls, and hot and cold indicators are built in. The ceramic disk valve arrangement supports the listed control system once the compatible rough-in is installed.

• Solid Brass and Finish

  The faucet is listed with solid brass construction and brass handles. Unlaquered Brass is a living finish that naturally ages and develops a patina unique to its environment.

• Dimensions

  The source lists 8 inches of front-to-back spout reach, a 3.88-inch spout height, and 8-inch faucet centers. Measure from the finished wall to the drain before installation so the water lands inside the basin.

• Care and What Ships

  The listed pieces include the mounting bracket, aerator, and two handles. The source does not publish a specific cleaner or care schedule, so wipe with a soft cloth, remove water spots promptly, and avoid abrasive products. The rough valve, ceramic disk valve, drain assembly, sink, and installation labor are not included.

Good to know

• Confirm the 8-inch faucet centers and three-hole layout before ordering.
• Allow 8 inches of reach and 3.88 inches of spout height above the basin.
• Confirm the RH08W rough-in, ceramic disk valve, and wall depth with your installer.
• Wall-mount installation is required. Order the RH08W rough valve required to complete the faucet, and confirm the three-hole, 8-inch-center layout, wall depth, and water connections before beginning.
• Faucet trim only. Sink, counter, rough-in valve, drain assembly, and other bathroom fixtures shown are not included.