Widespread Bathroom Sink Faucet With C-Spout

Three-piece widespread design. This bathroom sink faucet pairs a curved C-spout with two handles and a Satin Nickel finish for a coordinated sink installation.

• 8-inch faucet centers and three mounting holes for a widespread layout.
• Solid brass construction, ceramic disk valve, and 1.2 gallons-per-minute flow at 60 PSI.
• Push drain assembly, valve, mounting bracket, supply line, and aerator included.
• Mounting and installation are required. Sink and counter are not included.

• Widespread Installation

  This three-piece widespread faucet requires mounting and installation. Plan the spout and handle locations around the sink before beginning, and confirm that the installation area can accommodate three mounting holes and 8-inch faucet centers.

• Fit and Valve Compatibility

  The source lists 8-inch faucet centers, three mounting holes, a valve, and a widespread mounting configuration. Confirm the sink or counter layout and water connections before ordering so the included valve and faucet assembly suit the planned installation.

• Measured Spout Profile

  The curved, rigid C-spout reaches 7.13 inches from front to back and measures 6.75 inches from top to bottom. Check the basin footprint and backsplash clearance against these source measurements before installation.

• Flow and Water Use

  Maximum flow is listed as 1.2 gallons per minute at 60 PSI, and the source identifies EPA WaterSense certification. Compare the stated flow and available household pressure with local requirements before connecting the water supply.

• Two Handle Controls

  Two metal handles provide separate hot and cold indicators. The ceramic disk valve regulates temperature and water flow through the widespread faucet, giving each side a dedicated control at the sink.

• Brass Satin Nickel Finish

  The source specifies solid brass construction with a Satin Nickel finish and metal handles. For care, follow the finish guidance supplied with the fixture and avoid abrasive cleaners until their compatibility is confirmed.

• Included Components

  The listed pieces include the handles, valve, mounting bracket, push drain assembly, supply line, and aerator. These included components arrive in the box with the faucet; review them against the installation instructions before mounting, since the sink and counter are not listed as included.

Good to know

• Three-hole widespread layout with 8-inch faucet centers
• Confirm the sink or counter opening and water connections before ordering
• Curved rigid C-spout with 7.13-inch reach and 6.75-inch height
• Widespread mounting and installation are required. Confirm the three-hole layout, 8-inch faucet centers, and water connections before beginning.
• Faucet only. Sink and counter not included.