Widespread Lavatory Faucet With C-Spout in Polished Nickel

A polished nickel widespread faucet with a fixed C-spout, two lever handles, ceramic disk valves, and a measured 1.2 GPM flow rate.

The fixed C-spout and two separate lever handles create a coordinated three-piece profile over the sink. Polished nickel gives the faucet a bright reflective finish, while the arched spout keeps the water outlet centered over the basin.

• Finish and form

  The fixed C-spout and two separate lever handles create a coordinated three-piece profile over the sink. Polished nickel gives the faucet a bright reflective finish, while the arched spout keeps the water outlet centered over the basin.

• Installation

  Mounting and installation are required. Plan for a three-hole widespread sink or counter layout, connect the valve and supply lines, and secure the faucet with the supplied mounting hardware. Use a qualified plumber when the project or local requirements call for one.

• Fit and rough-in

  The listed faucet centers are 8 inches and the installation hole count is 3. Confirm that the basin or counter accepts this widespread spacing, then check the rough-in connections and valve location before ordering. The specified valve type is ceramic disk.

• Water flow

  The maximum listed flow rate is 1.2 gallons per minute at 60 PSI. That rating describes the faucet's water delivery at the stated pressure; actual performance depends on household plumbing and installation conditions. The spout is rigid and fixed rather than pull-down or swivel.

• Controls and temperature

  Two lever handles provide separate hot and cold control at the sink. Built-in hot and cold indicators are listed, helping identify each control during use. Balance the handles through the valve to reach the desired temperature and flow.

• Materials and finish

  Solid brass construction with metal lever handles and a Polished Nickel finish.

• Spout dimensions

  The listed spout height is 6 inches and the listed spout reach is 8.75 inches. Compare those dimensions with the basin and counter clearance before ordering.

• What ships

  The listed pieces include the handles, valve, mounting bracket, drain assembly, supply line, and aerator. The drain type is pop-up. A limited lifetime product warranty is also listed; confirm the installation documents for warranty terms and any project-specific requirements.

Good to know

• Widespread installation uses three mounting holes and 8-inch faucet centers.
• Confirm the valve, supply-line, drain, and rough-in locations before installation.
• The selected unit is Polished Nickel with Lever handles.
• Widespread mounting and installation are required. Confirm that the basin or counter accepts three holes before beginning.
• Faucet only. Sink and counter not included.