Widespread Lavatory Faucet With Low Spout

A Satin Nickel widespread bathroom faucet with a low fixed spout, two lever handles, solid brass construction, and 1.2 GPM maximum flow.

A low, rigid spout keeps the fixture profile compact above the basin. The Satin Nickel finish brings a soft metallic tone to the three-piece faucet while the fixed outlet stays in one position during use.

• Low Fixed Spout

  A low, rigid spout keeps the fixture profile compact above the basin. The satin nickel finish brings a soft metallic tone to the three-piece faucet while the fixed outlet stays in one position during use.

• Widespread Layout

  This faucet is designed for a widespread installation with separate spout and handle positions. Prepare a three-hole sink or countertop layout and confirm the 8-inch center measurement before ordering.

• Check the Fit

  The source dimensions list 8-inch centers, a 5.75-inch front-to-back reach, and a 3.17-inch spout height. Check basin position, backsplash clearance, and the reach over your sink.

• Measured Water Flow

  Maximum flow is listed at 1.2 gallons per minute at 60 PSI. The ceramic disk valve and included aerator support the specified water delivery, subject to your home's pressure and local requirements.

• Two Lever Handles

  Two metal lever handles frame the low spout and give the widespread fixture its balanced three-piece form. Confirm the handle clearance and hot and cold connection plan with your installer.

• Solid Brass Body

  The source lists solid brass construction and a satin nickel finish for the faucet. Compare the finish with nearby bathroom hardware, then use a soft cloth and the supplied care guidance.

• Installation Planning

  Plan for three 1.375-inch cutouts and 0.5-inch NPT connectors when preparing the countertop and water connections. Mounting and installation are required, so verify the rough-in first.

• Included Components

  The listed included pieces are a supply line, drain assembly, aerator, valve, handles, and mounting bracket. The sink and countertop are not included; follow the fixture instructions for care.

Good to know

• Confirm 8″ faucet centers and the three-hole layout before ordering.
• Allow 5.75″ of reach and 3.17″ of height above the basin.
• Plan three 1.375″ cutouts and 0.5″ NPT connections with your installer.
• Three-hole widespread mounting and installation are required. Confirm the 8-inch centers, 0.5-inch NPT connectors, and under-counter access with your installer.
• Faucet only. Sink, countertop, and other bathroom fixtures shown are not included.