Bar Stools, Set of 2, Black Faux Leather, Stainless Steel Sled Legs

Set of 2 bar stools with black faux leather upholstered seats, a low back and an open steel frame. The sled legs have a stainless steel finish, and a front bar works as a footrest.

Dimensions: 17.5 in W x 16 in D overall. Seat: 15.5 in W x 15.5 in D. Seat back: 4 in H. Seat height from floor: 31 in. Weight capacity: 250 lb.

• Foam-filled seat cushion
• Steel frame with sled legs
• Stackable, stationary design
• Partially assembled, tools included, 1 person suggested for assembly
• Avoid power tools during assembly
• Spot clean the fabric

• A minimalist steel frame

  Slim square steel tubing forms an open cage around the seat, with a single straight rail standing in for a back instead of a full panel. A boxy black cushion sits low and square inside the frame, and a low crossbar runs between the front and back legs near the floor.

• Assembly at home

  Assembly is required once the carton arrives, and the maker rates it a one-person job. Tools ship in the box, so you will not need to dig through a toolbox before you start, just the hardware already included with each stool.

• Fixed at bar height

  This stool is fixed at one height and does not adjust, so measure before you buy. Overall height runs 35 inches, tall enough for a bar-height counter rather than a standard dining or counter-height table. The low back rail rises just 4 inches above the seat, true to its low-back name.

• 250 pounds per seat

  Each stool in the pair is rated to hold up to 250 pounds, so the capacity is per stool, not shared across the set. The frame itself is light, listed at about 9.5 pounds, easy enough for one person to move and reposition.

• Brushed steel, faux leather

  The frame is steel with a bright stainless finish that reads clean and cool against a kitchen counter. The seat cushion is upholstered in black faux leather over a padded foam fill, giving the boxy cushion enough give to sit comfortably.

• Padded seat, low back

  The cushion is padded with foam fill, so the seat gives slightly under you rather than sitting rock hard on bare metal. The back is a single low rail rather than a full panel, and a footrest bar runs low across the front so your feet have somewhere to rest.

• Spot clean only

  Spot clean the faux leather with a soft cloth and mild soap when it needs it, and skip harsh chemicals or solvents that can crack the surface. Wipe the steel frame down the same way to keep the finish free of fingerprints and water spots.

• A pair, ready to build

  This listing is the pair, two stools total, not a single seat. Tools are included in the box, along with the hardware needed for the one-person assembly, so nothing extra to source before the stools are ready to use.

Good to know

• Each stool is 17.5 inches wide and 16 inches deep; you receive two.
• Seat height is 31 inches for a bar-height counter, not a 27 inch counter stool.
• The back rail rises 4 inches from the seat. Rated 250 pounds per stool.