Kolvern Immeruta Wood Bar Stool

A backless pine-seat stool on a bronze-black iron frame. Sold as one. Pick 24 inch counter height or 30 inch bar height.

The carton holds one stool, not a pair. You pick Counter Height at 24 inches floor to seat, or Bar Height at 30 inches. Seat width and depth stay 16 by 12 inches on both.

• A thick solid wood seat

  The seat is not a thin panel; it is a heavy, square block of pine roughly as deep as it is wide, with knots and saw-textured grain left on show. There is no back and no cushion, so the whole piece reads as a single chunk of timber balanced on a frame.

• Square bronze-black iron frame

  Four straight legs run in a square footprint, powder-coated in a matte bronze-black that hides fingerprints and scuffs. Two square crossbars stack low near the floor: the lower one is the actual footrest, and the upper one adds rigidity so the frame does not rack side to side.

• No assembly required

  This stool arrives fully built; there are no legs to attach, no hardware bag, and no tools needed before you use it. Set it down at the counter or bar and it is ready, which also means there is no assembly step to get wrong or skip.

• Dust it, do not soak it

  Keep a coaster under drinks so rings do not sit on the wood. For regular care, use a feather duster or a slightly damp cloth, never a soaked one. Skip silicone polish, abrasive pads, and solvent-based cleaners, since they can strip the finish or dull the wood grain.

• Backless, with a footrest

  There is no cushion and no backrest here, just the flat top of the wood block to sit on, so this suits quick seating at a counter more than long, lounging meals. The lower crossbar between the legs doubles as a footrest, and the frame does not swivel, so the stool stays put once you set it down.

• Kiln-dried pine, powder-coated iron

  The seat is kiln-dried solid pine wood, chosen because it will not warp or crack once it is indoors. The frame is metal, an iron finished with a powder coat rather than paint, so the bronze-black color resists chipping better than a sprayed finish would.

• Pick counter or bar height

  This stool comes in two seat heights: Counter Height at 24 inches floor to seat, and Bar Height at 30 inches. Counter height suits a standard kitchen counter or island; bar height suits a taller bar-top counter. Check your counter's height before ordering, since the wrong pick is the most common return on stools.

• Rated to 250 pounds

  Weight capacity is 250 pounds for either height option, seat and frame together. The stool itself is light, at 16 pounds, so it is easy to carry or tuck under a counter out of the way, though that same lightness means it can shift if you lean on just one edge.

• One stool, ready to use

  You receive one stool in the height you choose, not a pair and not both sizes. It arrives fully assembled, with nothing to attach and nothing extra in the box: no cushion, no cover, and no seat pad included, just the stool itself, ready to carry to the counter.

Good to know

• Seat is 16 inches wide and 12 inches deep on both heights.
• Counter Height is 24 inches floor to seat. Bar Height is 30 inches.
• Bar overall is 30 inches high, 16 wide, and 12 deep. The stool is backless.
• Rated 250 pounds. Ships fully assembled. Use coasters on the pine seat.
• None required. Use coasters on the pine seat. Dust with a feather duster or a slightly damp cloth. Do not use silicone polish, abrasives, or solvents.
• You receive one stool, not a pair. Island, table, and other room pieces are styling only.