Kolvern Labronzo Metal Bar Stool

A gray polyester bar stool on a weathered steel pipe frame. Seat height is 30 inches. One stool ships in the carton, with a low back and short arms.

Seat height is 30 inches from the floor, for a standard bar-height counter. The stool is 39.25 inches high overall, 20.5 inches wide, and 21.5 inches deep.

• A low wingback silhouette

  The back curves low and wraps forward on both sides into short arms, more like a small upholstered chair than a typical backless stool. One piece of fabric covers the seat and back together, with a clean seam where the cushion meets the pipe frame below.

• Pipe-fitting steel base

  The base is built to look like plumbing pipe, with round tube legs, T-joints, and flange-style collars at every connection, all in a weathered silver-gray finish rather than a shiny chrome. A square footrest bar links all four legs low to the floor.

• One person, one screwdriver

  This stool needs assembly at home. The maker suggests one person can do it, working with a screwdriver rather than a power tool, since overdriving the screws on a pipe-style frame can strip the fittings. Set aside a little time before you sit down to use it.

• Spot clean with a dry cloth

  Wipe up spills quickly and spot clean the fabric with a dry cloth rather than soaking the seat. The stain-resistant weave helps everyday marks lift without a special cleaner, and the steel base only needs an occasional dusting to keep the weathered finish looking even.

• Short arms, no swivel

  The curved back doubles as two short armrests, giving your elbows somewhere to rest that a fully backless stool cannot offer. The seat is padded under the fabric rather than a hard shell, and a footrest keeps your feet up off the floor, though the base is stationary and does not swivel.

• Steel frame, polyester upholstery

  The frame is steel, finished in a weathered silver-gray rather than a bright chrome, built to look like joined pipe fittings. The seat and back are upholstered in 100 percent polyester fabric with a nubby woven texture, chosen for stain resistance over natural fiber.

• Bar height, 30 inch seat

  This is the bar-height stool, not the counter-height version: seat height measures 30 inches off the floor, and the stool stands 39.25 inches overall. A bar-height stool like this one suits a counter or bar roughly 40 to 44 inches high, taller than a standard kitchen counter.

• 250 pound weight limit

  Weight capacity on this stool is 250 pounds. The stool itself weighs 28 pounds once assembled, light enough for one person to reposition at the counter, though the pipe-style frame is rated for regular use rather than standing or rocking on two legs.

• One stool per box

  You get one stool, shipped fully in one box, not a pair. It arrives with the seat and back finished as one piece and the pipe-frame legs needing to be joined at home, with the hardware included. No cushion or seat pad ships separately, and the warranty is one year, limited.

Good to know

• The stool is 20.5 inches wide and 21.5 inches deep; you receive one.
• Seat height is 30 inches, built for a standard bar-height counter.
• Low back rises 9.25 inches from the seat and wraps into short arms.
• Rated 250 pounds. The seat is stationary and does not swivel.
• Required. The listing suggests one person. Bring a screwdriver and skip power tools. Wipe the seat with a dry cloth after setup.
• Island, table, and other room pieces are styling only.