Kolvern Puntanere Wood Side Chair Pair

A pair of distressed-oak rubberwood slat-back side chairs, each 36.9 inches high, sold two to a carton.

The carton holds two side chairs, not one. Each chair is listed at 36.9 inches high, 18.9 inches wide, and 22.24 inches deep, so tape two of those rectangles before you order.

• Curved slat back

  The back is a curved top rail over three straight vertical slats, all solid wood, rising 19.4 inches above the seat. No fabric or padding anywhere, just joined wood front to back.

• Solid wood seat, tapered legs

  The seat is a single solid wood plank with a rounded, waterfall edge along the front corners rather than a padded cushion. Four tapered legs splay slightly and are joined low by an H-shaped stretcher for stability.

• Assembly, bring a screwdriver

  Assembly is required, and the parts are labeled for one person to manage, but a screwdriver is not included in the box, so have your own ready before you join the back, seat, and legs.

• Wipe clean care

  Wipe the wood down with a soft, damp cloth to handle dust or spills, and dry it after; there is no fabric to worry about, just the finish, so skip household cleaners that could strip the color.

• Curved rail, open seating

  There is no cushion here: the seat and back are both solid wood, but the top rail contours gently to your shoulders rather than sitting flat, and the tall back gives more to lean against than a low-back chair.

• Solid rubberwood, distressed finish

  Frame, back, and seat are all solid rubberwood, kiln-dried and joined with corner blocks, finished in a distressed oak tone that lets the natural wood grain and small marks show through rather than a painted or fabric surface.

• Dining height, standard fit

  This is a dining-height side chair, not a bar or counter stool: the seat height is 17.5 inches off the floor, sized to match a standard dining table height so your knees clear the apron.

• 250 pounds per chair

  Weight capacity is 250 pounds per chair, carried on four tapered legs and the H-stretcher near the floor, so the load spreads across the frame rather than resting on the seat plank alone.

• Ships as a pair

  The carton arrives with two side chairs, both already finished in distressed oak; only the back, seat, and legs need to go together at home, and note that a screwdriver is not included, so have one ready.

Good to know

• Each chair is 18.9 inches wide and 22.24 inches deep; you receive two.
• Seat height is 17.5 inches. Check that against your table apron.
• Slat-back rise from the seat is 19.4 inches; overall height is 36.9 inches.
• Rated 250 pounds per chair.
• Required. The listing suggests one person. A screwdriver is not included. Wipe the wood with a damp cloth after you set the chairs up.
• The carton holds two chairs. Table, rug, vase, and other room pieces are styling only.