Kolvern Spinazzola Upholstered Dining Chair Set of 4

Four light-beige polyester side chairs on natural-oak rubberwood legs, each 30.8 inches high, sold four to a carton.

The carton holds four side chairs, not one. Each chair is listed at 30.8 inches high, 19.6 inches wide, and 20.6 inches deep, so tape four of those rectangles before you order.

• Curved wing-shaped back

  The backrest is a single curved, wing-shaped rail in natural oak, resting on two slim posts joined by one horizontal slat at mid-height. The grain runs across the curve in one continuous piece rather than stacked boards, and the whole rail is rounded smooth at both ends.

• Tapered legs, low stretcher

  Four tapered legs splay slightly outward from the seat and are joined near the floor by a stretcher on each side, an open, mid-century stance rather than a boxy, enclosed base. Legs and back posts share the same natural oak finish as the top rail.

• Assembly at home

  Assembly is required. The listing recommends two people for the job, and the hardware and tools you need ship in the carton, so there is nothing extra to buy before the legs and back come together at home.

• Cloth, soap, and water

  Clean the fabric seat with a cloth, mild soap, and warm water rather than a stronger cleaner or a wet wipe-down. Wipe the wood frame the same gentle way, and blot any spill before it sets rather than letting it soak into the seam.

• Padded seat, curved back

  The seat is foam-padded beneath the fabric rather than a bare wood pan, and the curved top rail cradles your lower back instead of sitting flat like a straight ladder rail. There is no swivel and no armrests; this is a fixed four-leg dining chair, not a task chair.

• Rubberwood frame, poly seat

  Legs, back posts, and the curved top rail are solid rubberwood, kiln-dried and finished in a natural oak tone. The seat and back panel are the only upholstered parts, a light beige polyester fabric over a foam pad rather than leather or a woven material.

• Seat height, dining fit

  Seat height is 18 inches off the floor, standard dining height rather than counter or bar height. Each chair measures 19.6 inches wide and 20.6 inches deep at the base, so check that footprint against your table's apron and how close the chairs will sit to each other.

• 300-pound rating

  Weight capacity is 300 pounds per chair. The listing also notes these chairs are not built for commercial use, so plan on home dining rather than a restaurant, cafe, or rental property putting them through daily heavy turnover.

• Ships as four chairs

  The order arrives as a set of four side chairs, matching the four-chair specification for this listing. Assembly hardware and tools are included in the box, and coverage is a 90-day limited warranty. Product weight is listed at 15 pounds overall.

Good to know

• Each chair is 19.6 inches wide and 20.6 inches deep; you receive four.
• Seat height is 18 inches. Check that against your table apron.
• Back rise from the seat is 12.8 inches; overall height is 30.8 inches.
• Rated 300 pounds per chair.
• Required. Two people is the listed suggestion. Tools are included. Clean the finish with a cloth, mild soap, and warm water after you set the chairs up.
• Sold and shipped as a matching set of four chairs. Table, rug, and other room pieces shown are styling only.