Marnau Vezid 1-Light Wall Sconce

A single cone shade swings from a matte-black jointed arm in matte black. Hardwired and damp-rated, it mounts shade-up or shade-down and ships with its own dimmable bulb.

The fixture holds one bulb behind a matte black metal cone shade, 10 inches across at the base. A matte-black swivel joint on the arm lets you angle the light exactly where you want it.

• Matte black cone, matte black joint

  A single matte black metal cone angles off a matte black swivel joint on a short arm, with a circular backplate flush against the wall. The finish reads industrial rather than polished, closer to a workshop lamp than a chandelier.

• A swivel that aims light

  The arm's matte black joint swivels so you can angle the shade up toward the ceiling or down toward a mirror, and the backplate mounts with the cone pointing either direction. It suits a bathroom vanity, an entry, or a reading nook beside a headboard.

• Hardwired wall installation

  This sconce is hardwired, not plug-in, so it wires directly into a wall junction box rather than a lamp cord and outlet. Most buyers have an electrician make the connection at the switch leg, especially if you are adding a new box rather than replacing an existing fixture.

• Set your own mount height

  There is no fixed installation height since this hangs on the wall, not from the ceiling: aim for roughly eye level in a hallway, or lower beside a headboard or vanity mirror. The arm extends 11 inches from the wall and the shade itself stands 5.5 inches tall, so leave clearance below whatever you mount it near.

• One dimmable bulb included

  The single E26 medium-base socket takes any bulb up to 100 watts, and a dimmable vintage-style bulb ships already installed so you are not hunting for a compatible one on day one. To use the fixture's full dimming range you will still need a dimmer switch on the wall, sold separately.

• Damp-rated, listed for indoor use

  This fixture is damp-rated, which covers a covered porch, an enclosed patio, or a bathroom outside the direct spray of a shower, but it is not rated for a wet location with direct exposure to rain or water. It carries UL, cUL, cETL and ETL listing for indoor residential wiring.

• Simple care, no re-lamping tools

  Wipe the matte black finish and the glass-free metal cone with a dry, soft cloth to clear dust; skip household cleaners, which can dull the finish. Because the bulb sits in an open socket at the end of the arm, changing it later is a simple twist, no disassembly required.

• What comes in the box

  The box includes the sconce with its arm and backplate already assembled, mounting screws, and the dimmable bulb described above already included, so the only thing you supply is the wall wiring and a dimmer switch if you want the full range. It weighs 2 pounds.

Good to know

• Overall 8 inches tall by 10 inches wide; it extends 11 inches from the wall.
• Mounts on the wall shade-up or shade-down; the swivel joint angles the light further.
• Damp-rated for a bath or covered porch; it is not a wet-location fixture.
• Hardwired wall mount required; ships with one dimmable bulb.
• One wall sconce and its included bulb are the product. Furniture, wall, and surrounding items shown are styling only and not included.