Polished Chrome Widespread Lavatory Faucet With C-Spout and Cross Handles by ROHL A2328XMAPC-2

The ROHL A2328XMAPC-2 is a Polished Chrome bathroom sink faucet. The photograph shows a curved C-shaped spout on a round base between two cross handles with hot and cold marks on the handle faces.

Number of handles is 2. Handle style is cross. Handle material is brass. Valve type is ceramic disk. Spout type is rigid / fixed. Built-in features are hot and cold indicators.

Mounting is widespread, and mounting / installation is required. Installation holes are 3. Faucet centers are 8 inches. Spout reach is 6.92 inches front to back. Spout height is 4.95 inches.

Maximum flow rate is 1.2 gallons per minute at 60 PSI. Material is solid brass. Product weight is 9 lb.

Pieces included are handle(s), valve, mounting bracket, drain assembly, supply line, and aerator. Drain is pop-up.

Set the three-hole layout and 8-inch centers before ordering. Allow the listed reach and height above the basin, and check backsplash clearance. Sink, countertop, and other bathroom fixtures shown are not included.

• Curved C-Spout

  A graceful curved C-spout balances the faucet's crisp, minimal geometry. The fixed spout gives this three-piece arrangement a tall, open profile above the basin, while polished chrome adds a bright finish to the clean mechanical-inspired forms.

• Three-Hole Installation

  This faucet is designed for widespread installation across three mounting holes. The listed faucet centers are 8 inches, so measure the countertop or sink layout before ordering. Mounting and plumbing installation are required, and an installer can confirm the rough-in compatibility.

• Check the Fit

  The spout reaches 6.92 inches from front to back and stands 4.95 inches high. Check that reach against the basin, then measure backsplash clearance and the existing hole spacing. These fit measurements help confirm compatibility before the installation begins.

• Measured Water Flow

  Maximum water flow is listed at 1.2 gallons per minute at 60 PSI. A ceramic disk valve manages the water path. Confirm local plumbing requirements and available water pressure with your installer before connecting the supply lines and putting the faucet into service.

• Cross Handle Controls

  Two cross handles provide separate hot and cold controls, with built-in indicators to help identify temperature. The brass handles match the fixture's solid brass construction. Turn each control gradually during setup and confirm the hot and cold connections with your installer.

• Polished Chrome Finish

  Polished Chrome is the selected finish for this faucet. It has solid brass construction and brass handle material, pairing durable metal details with a reflective surface. Its bright finish coordinates easily with existing bathroom hardware and basin fixtures.

• Included Pieces

  The listed included pieces are the handles, valve, mounting bracket, drain assembly, supply line, and aerator. The pop-up drain is part of the faucet package. The sink, countertop, and other bathroom fixtures shown in the product photo are not included.

• Care

  Wipe the polished chrome surface with a soft cloth and follow the care guidance supplied with the fixture. Confirm an approved cleaner in the ROHL care instructions before using one.

Good to know

• Confirm the 8″ faucet centers and three-hole layout before ordering.
• Allow 6.92″ of reach and 4.95″ of height above the basin; check backsplash clearance.
• Plan the pop-up drain, supply line, and valve connections with your installer.