Widespread Lavatory Faucet with U-Spout by ROHL A2218LMPN-2

This polished nickel widespread lavatory faucet pairs a squared, fixed U-spout with two slim lever handles on stacked bases.

It mounts as a three-hole widespread deck fixture. Widespread mounting and installation are required. Confirm the three-hole, 8-inch-center layout and rough-in locations before beginning.

Separate lever handles provide hot and cold control at the sink. A ceramic disk valve is listed as the compatible valve type. The spout is rigid and fixed, so the stream stays over the basin.

The body is solid brass with a polished nickel finish. The photograph shows a bright metal surface along the squared U-curve and the matching handle stems.

Faucet centers are 8 inches. Spout height is 5 29/32 inches and spout reach is 6.69 inches. Maximum flow is 1.2 gallons per minute at 60 PSI. Drain type is pop-up.

The listing is for the faucet only. The sink, countertop, mirror, and bathroom furnishings are not included. Confirm hole spacing, supply connections, drain fit, and backsplash clearance before installation.

Wipe the polished nickel finish with a soft cloth after use. Remove mineral marks gently and avoid abrasive pads that can dull the reflective surface.

• Design profile

  A polished nickel finish brings a reflective surface to the three-piece faucet, while the fixed U-spout creates a clear focal line over the basin. Solid brass construction gives the fixture a substantial material specification for a lasting bathroom installation.

• Installation

  Widespread mounting and installation are required for this fixture. It uses three mounting holes, so plan for a qualified plumber to connect the separate handles, ceramic disk valve, supply lines, and drain assembly. Confirm the rough-in before securing the faucet.

• Fit and compatibility

  Measure the sink or countertop before ordering: the listed faucet centers are 8 inches and the installation hole count is three. A widespread layout keeps the handles apart from the spout. Confirm hole spacing, connection locations, and rough-in clearance for the basin.

• Water flow

  The listed maximum flow rate is 1.2 gallons per minute at 60 PSI. The included aerator helps form the outlet stream, while the rigid fixed spout keeps water directed over the sink. Verify household pressure and local plumbing requirements before installation.

• Controls and temperature

  Separate lever handles provide the hot and cold controls at the sink, with a ceramic disk valve listed for compatibility. Adjust each lever to balance temperature and flow. The selected configuration is the lever style shown with the Polished Nickel finish.

• Materials and care

  The solid brass body and polished nickel finish are the key material and finish specifications. Wipe the faucet with a soft cloth after use, and remove mineral marks gently. Avoid abrasive cleaners that can dull the reflective finish around the spout and handles.

• What ships

  The listed pieces include two handles, a valve, mounting bracket, drain assembly, supply line, and aerator. The drain is identified as pop-up, and the spout is rigid and fixed. The sink, countertop, and surrounding bathroom furnishings are not included.

Good to know

• Widespread installation uses three mounting holes and 8-inch faucet centers.
• Confirm the valve, supply-line, drain, and rough-in locations before installation.
• The selected unit is Polished Nickel with Lever handles.