Tessmar Blankskali Swivel Reclining Glider

A 33 inch wide swivel reclining glider in beige polyester velvet, with a square padded back, track arms, and a black metal base that glides, swivels, and reclines.

The back is a smooth, padded square panel framed by straight track arms with soft edges rather than a rolled or wing silhouette. Beige polyester velvet wraps the whole chair in one continuous surface, with a T-cushion seat that sits flush between the arms.

• Square back, track arms

  The back is a smooth, padded square panel framed by straight track arms with soft edges rather than a rolled or wing silhouette. Beige polyester velvet wraps the whole chair in one continuous surface, with a T-cushion seat that sits flush between the arms.

• Glide, swivel, and recline

  The metal base glides forward and back and turns a full 360 degrees when upright. A hidden lever beside the cushion starts the push-back recline and lifts the footrest; the seatback opens to about 117 degrees at full recline, then closes again when you push upright.

• Assembles in under 15 minutes

  It ships in one box with the parts, tools, and instructions included. Two people can finish assembly in under 15 minutes; the main job is locking the back onto the seat and base rather than building the chair from scratch.

• Wipe-clean velvet

  The beige upholstery is polyester velvet that wipes free of most spills with a damp cloth. Blot rather than scrub so the pile stays even, and vacuum lightly with the upholstery attachment for day-to-day dust.

• Seat sized for one

  The seat is 19.5 inches high, 21.5 inches wide, and 20.5 inches deep, with a 20 inch back above it from seat to top. Pocket and sinuous springs under foam and polyester fill keep the cushion supportive rather than flat, at a listed 250 pound capacity.

• Measure for the recline

  Upright it is 39.5 inches high, 33 inches wide, and 35.5 inches deep, close enough to a standard armchair to clear most doorways. Leave clear floor space in front for the footrest when it opens, and measure any tight hallway turns before it arrives.

• Plywood frame, metal base

  The frame is plywood with a steel recline mechanism and a heavy-duty black metal swivel base. Foam and polyester fill sit over pocket and sinuous springs, so the chair holds its shape through glide and recline cycles rather than sagging at the seat.

• Beige polyester velvet

  Upholstery is polyester velvet in beige, a soft short pile rather than a shiny satin. The same fabric covers the arms, back, and T-cushion seat so the color and nap read the same from every angle of the chair.

• One glider, footrest built in

  One chair arrives in a single box; the footrest is built into the frame and extends with the recline, so no separate ottoman ships with it. It carries a 1 year limited warranty for defects.

Good to know

• Tape a 33 by 35.5 inch rectangle; leave room in front for the footrest.
• Seat height is 19.5 inches and seat width is 21.5 inches side to side.
• At 92 pounds it ships in one box; two people finish assembly faster.
• Listed capacity is 250 pounds; manual push-back with a 360 degree swivel.
• Assembly required. Two people can finish it in under 15 minutes using the included tools; the main step is attaching the back to the seat and base.
• One swivel reclining glider is included. Tables, rugs, lamps, plants, books, and other room pieces shown are styling only.