Tessmar Saksun Tufted Armchair

A 37 inch wide tufted armchair on nine-inch pecan birch legs, with a solid wood frame and a 300 pound rating.

The listed footprint is 31.5 inches high, 37 inches wide, and 29.5 inches deep. Tape that rectangle before you park it, because the flared arms sit in the full 37 inch width rather than in the 20 inch seat.

• Button tufted back panel

  Two dark upholstered buttons mark the horizontal seam across the three-panel back cushion, a soft biscuit tuft rather than a deep diamond pattern. The seat cushion underneath is left plain, so the tufting stays a back-only detail.

• Legs attach at home

  Assembly is required, but it's a small job: the four splayed legs are the only removable part, and they attach at home once the chair arrives otherwise built. The included hardware is all you need, no separate tools required.

• Spot clean only

  Care is spot cleaning with a dry, solvent-based cleaner, not water or a steam cleaner. Wipe up spills right away with a clean, dry cloth so the polyester weave doesn't take a soak.

• A seat built for one

  The seat is 18 inches high, 20 inches wide, and 20 inches deep, with a 13.5 inch back above it, sized for one person to sit rather than lounge sideways. Foam over sinuous springs keeps the cushion supportive without a deep sink.

• Measure your own doorway

  There's no published minimum doorway width for this chair, so measure your own doorway and any hallway turns before it arrives, especially with the flared arms filling the full 37 inch width. At 36.74 pounds, one person can carry it in.

• Solid wood, foam and springs

  The frame is solid wood, standing on splayed pecan birch legs 9 inches high. Foam sits over sinuous springs inside both the seat and the tufted back, and the whole chair is rated to 300 pounds.

• Polyester basketweave fabric

  Upholstery is a polyester plain-weave basketweave in a deep blue, with a subtle crosshatch texture rather than a smooth, solid-color fabric. It's the same weave across the arms, back and seat for one continuous surface.

• One chair, legs separate

  One armchair arrives with its four legs unattached; the hardware to attach them is included, and no separate ottoman or pillow ships with it. It carries a 1 year limited warranty.

Good to know

• Tape a 37 by 29.5 inch rectangle; the flared arms use the full width.
• Seat height is 18 inches. Confirm that against the tables you already own.
• At 36.7 pounds it is one-person to unbox, then four legs go on.
• Keep 300 pounds in mind if two people will share it now and then.
• Attach the four 9 inch pecan birch legs. The chair body arrives assembled except for those legs.
• The armchair is the product. Side tables, rugs, curtains, lamps, plants, artwork, and other room furnishings are styling only.