Tessmar Funningsfjordur Upholstered Swivel Chair

A 33 inch wide swivel armchair on a hidden metal base, with rolled arms, a gathered skirt, and a 350 pound weight rating.

The listed footprint is 36 inches high, 33 inches wide, and 33.25 inches deep. Tape that square before you place it; the minimum doorway to bring it through is 34 inches.

• Rolled arms, floor length skirt

  Deep rolled arms curve down to meet a floor length skirt with a center kick pleat at the front, so the chair reads as a traditional club chair rather than anything modern. The back cushion has a slightly shaped top edge, and every seam is finished with a thin matching cord.

• Assembly is the swivel base

  Assembly is required, and on a hidden-base chair like this one that means securing the swivel mechanism underneath before the chair sits level and turns smoothly. The seat cushion lifts off on its own and needs no tools at all, just the base underneath.

• Spot clean, brush the dust

  Clean the fabric by lightly brushing or vacuuming to lift surface dust, and treat spills with a spot clean rather than a full wash. The performance weave is stain and UV resistant, so everyday marks and sun near a window are less of a worry than on a plain cotton cover.

• Seat height 18.7 inches

  Seat height is 18.7 inches, with an 18.8 inch depth and a 20.5 inch width, sized for one person rather than a lounging sofa seat. Foam sits over coil springs for a seat that pushes back rather than sinking flat, and the whole chair swivels a full circle so you can turn toward a window or a conversation without standing up.

• 34 inch doorway minimum

  The listed minimum doorway width is 34 inches, and at 33 inches wide and 33.25 inches deep the chair itself is close to that number, so measure your actual doorway and any hallway turn before it ships. It arrives as one piece at 63.9 pounds, no boxes to assemble into a frame.

• Wood frame, coil spring foam

  The frame combines solid and manufactured wood, with round recessed arms built over a manufactured wood core rather than exposed frame rails. Fill is foam over coil springs at 1.8 pounds per cubic foot density, rated to hold 350 pounds seated.

• Performance fabric, piped edges

  The cover is a beige performance fabric, woven to resist stains and fade from UV exposure near a sunny window. Every seam on the arms and back is finished with a thin matching cord, and the seat cushion cover is removable on its own for spot cleaning or an eventual recover.

• One chair, cushion included

  The chair ships as one upholstered piece with the seat cushion already in place, not a flat pack of parts to build. Nothing else comes with it, no extra pillow and no slipcover, just the armchair with its cushion included and ready to sit in once assembly is done.

Good to know

• Tape a 33 by 33.25 inch square; the doorway you bring it through needs 34 inches.
• Seat height is 18.7 inches. Check that against chairs and tables you already own.
• At 63.9 pounds it ships in one carton, with assembly required at home.
• Keep 350 pounds in mind as the listed weight capacity.
• Required at home. The frame arrives upholstered; follow the included hardware to finish assembly.
• One upholstered swivel armchair is included. Side tables, books, bowls, plants, rugs and other room pieces are styling only. Doorways are fixtures shown for scale.