Tessmar Kvivik Tufted Armchair
4.2In stock
Sold out. Email me when it’s back.
Delivery details
Free ground shippingGround shipping is not available to this ZIP code. Contact us for a quote.
Get it by
Delivery method
Details
A 30.3 inch wide tufted wingback armchair in Green Floral Linen, on 8.5 inch black wood legs, with a solid-plus-manufactured-wood frame and a 300 pound rating.
The listed footprint is 37.4 inches high, 30.3 inches wide, and 29.1 inches deep. Tape that rectangle before you place it; the wingback shape carries extra height at the back corners beyond the seat itself.
- Compact wingback proportions
At 30.3 inches wide and 29.1 inches deep, this chair reads as a full wingback without the footprint of one. The seat sits 18.9 inches off the floor with a 23.2 inch back rising above it, so it holds its own as a single reading chair in a bedroom corner or a narrow living room bay without crowding the walkway around it.
- A layered botanical print
The fabric is printed, not woven, with layered palm fronds and botanical leaves in shades of sage and charcoal green across a cream ground, with small bursts of warm orange and gold breaking up the greens. The pattern runs continuously from the wingback across the rolled arms and down the seat front, so it reads as one print rather than pieced panels.
- Assembly is just the legs
Assembly is limited to the legs. They thread into mounts under the seat frame at home, and the hardware needed ships in the box with the chair. The back, arms, and seat arrive fully upholstered and built at the factory, so there is no frame to bolt together and no fabric to stretch, just the legs and a screwdriver.
- Spot clean only
Spot clean the linen with a soft, clean cloth and mild soap; blot rather than rub so the print does not fade or fray. Avoid abrasive brushing or scrubbing pads, which dull the printed pattern faster than the fabric itself wears. Vacuum around the arms and seat on low suction to keep dust from settling into the seams.
- Firm support, not stiff
The seat sits 19.7 inches deep and 18.9 inches off the floor, with a 23.2 inch wingback rising behind it to support the shoulders and neck when you lean back. The foam fill is dense and firm enough to hold you up without going stiff, so this sits more upright than a deep lounge chair, better for reading or conversation than for sinking in all day.
- Measure the doorway first
The assembled chair is 30.3 inches wide, 29.1 inches deep, and 37.4 inches high, wider than most interior doors, so measure your doorway and any stairwell turn before it arrives. It ships with the legs detached: the body, back, arms, and seat in one piece, is what has to clear the opening, while the legs and hardware travel separately and attach once the chair is inside the room.
- Solid wood frame, foam fill
The frame combines solid wood with manufactured wood panels for the parts that do not show, and the seat sits on an MDF base underneath the foam. Fill throughout the seat and back is dense foam, not loose down or a spring deck, so the cushion holds its shape instead of compressing flat over time. The flared arms are the same fabric-wrapped wood as the rest of the frame.
- Printed linen upholstery
The upholstery is linen, finished with a printed botanical pattern in green, cream, and warm orange rather than a solid weave. Linen has a slightly nubby, matte hand and takes a crisp print well, but it wrinkles and creases more easily than a synthetic weave and is not a performance fabric built for heavy pet traffic. Treat it more like a linen shirt than a slipcover.
- One armchair, legs separate
What ships is one armchair: the upholstered body built and finished, plus the four legs and their mounting hardware packed separately and not yet attached. No cushions, pillows, or ottoman come with it, only the chair itself. Everything needed to finish assembly is included in the box, so nothing extra has to be sourced or bought before you can sit down in it.
Good to know
- Tape a 30.3 by 29.1 inch rectangle; the wingback shape adds height at the back corners.
- Seat height is 18.9 inches. Confirm that against the tables you already own.
- At 38.1 pounds it is one-person to unbox, then the legs go on.
- Keep 300 pounds in mind for everyday sitting.
- Attach the solid wood legs with the included hardware. The chair body arrives assembled except for those legs.
- Side table, curtains, and other furniture shown are styling only. The armchair is the product.
Specifications
- Product type
- Armchair
- Overall
- 37.4″ H × 30.3″ W × 29.1″ D
- Seat
- 18.9″ H × 19.3″ W × 19.7″ D
- Seat back
- 23.2″ H
- Legs
- 8.5″ H, solid wood, black finish
- Upholstery
- Linen, Green Floral Linen print
- Frame
- Solid + manufactured wood
- Arms
- Flared, fabric-wrapped wood
- Fill
- Foam
- Seat base
- MDF
- Weight capacity
- 300 lb
- Product weight
- 38.1 lb
- Assembly
- Yes; legs attach at home
- Care
- Spot clean with a soft cloth; avoid abrasive brushing
- Warranty
- None listed by manufacturer
Delivery & returns
Free ground shipping
Dispatched in 1–2 business days, then 1–3 in transit. Tracking emailed the day it leaves us.
Contiguous 48 states, street addresses only. No PO boxes or APO/FPO.
Free returns within 30 days
Unused, unassembled, and in its original packaging. Email us and we send a prepaid FedEx label or schedule a pickup. No restocking fee.
Damaged on arrival? Send photos to customerservice@tloom.com within 7 days for a free replacement or refund.
Tessmar Kvivik Tufted Armchair
Click image to zoom
Side by side
Compare similar accent chairs
Prices and ratings as shown on each product page.
| Product |
This itemTessmar
Kvivik Tufted Armchair |
|---|---|
| Price |
$205.00
|
| Rating | |
| Product type | Armchair |
| Overall | 37.4″ H × 30.3″ W × 29.1″ D |
| Seat | 18.9″ H × 19.3″ W × 19.7″ D |
| Seat back | 23.2″ H |
| Legs | 8.5″ H, solid wood, black finish |
| Upholstery | Linen, Green Floral Linen print |
| Actions | Viewing |
Finish the setup
Goes with it
Pieces that pair with this accent chair.
No reviews match those filters.
Same category