Tessmar Runavik Upholstered Wingback Chair

A 27.2 inch wide wingback chair in distressed warm brown faux leather with a raised embossed pattern, dark nailhead-trimmed arms, a solid wood frame, and a 250 pound weight rating.

Overall footprint is 40.6 inches high, 27.2 inches wide, and 35.4 inches deep. Tape that rectangle before you place it; the tall wing back needs full headroom behind it.

• A wingback in distressed faux leather

  Tall wings flare out from a high back and taper down into scooped arms, all covered in the same distressed warm brown faux leather with a raised embossed abstract pattern. Nailhead trim borders both arm fronts in a hand-applied row, and the chair rests on four tapered black wood legs. One loose seat cushion sits below a slightly inset back panel.

• Four legs attach at home

  The chair ships mostly built; only the four solid wood legs need to attach once it arrives. No specialty tools required beyond what typically comes packed with the hardware, and the seat cushion simply sits in place rather than needing to be secured.

• Spot clean, mild soap only

  Wipe spills with a damp cloth and a mild soap solution rather than a leather conditioner or oil, since this is a faux material, not genuine hide. Spot clean rather than saturate the cushion, and let it air dry before sitting again.

• High back, 250-pound rating

  Seat height is 17.5 inches, with 21.3 inches of width and 20.9 inches of depth, and the back rises 23 inches above the seat for full head support while you lounge. Foam sits over web suspension for the cushioning, and the chair carries a 250 pound weight capacity for one person sitting, not a bench load.

• Light chair, one-person unbox

  At 35 pounds, this is light enough to unbox and carry by yourself; the legs ship detached, so the box is narrower than the assembled chair. Measure your doorway and stairwell before delivery, since the wingback shape and its 40.6-inch height need clearance to tip through without scraping a wall.

• Solid and manufactured wood frame

  The frame combines solid and manufactured wood, built to hold a high wingback shape without sagging at the sides. Underneath the upholstery, foam sits over a web suspension system rather than springs, giving a firmer, more structured seat than a coil-sprung cushion. The four legs are solid wood, not a veneer wrap.

• Faux leather, not genuine hide

  This is distressed warm brown faux leather, a coated material rather than real or bonded animal hide, with a raised embossed abstract pattern that catches the light across the surface. Nailhead trim runs along both arm fronts in a hand-applied row, adding a tailored, worn-in look.

• One chair, legs ship detached

  This listing is for one wingback chair. It arrives with the seat, back, and arms already built and upholstered; only the four legs ship separately and attach at home. A 90-day limited warranty is included, shorter than the coverage on some upholstered pieces.

Good to know

• Tape a 27.2 by 35.4 inch rectangle; the tall wing back needs headroom behind it.
• Seat height is 17.5 inches. Confirm that against the tables you already own.
• At 35 pounds it is one-person to unbox, then the four legs attach.
• Keep 250 pounds in mind; the rating is a chair sit, not a bench load.
• Attach the four 8.1 inch solid wood legs. The chair body arrives assembled except for those legs.
• Sold as one wingback chair. Side tables, rugs, curtains, plants, and other room pieces are styling only.