Varnholt Haldarsvik Wood TV Stand

A 70 inch wide two door TV stand in manufactured wood, rustic oak finish, with adjustable interior shelves, built in cable management, and a 150 pound top capacity.

The listed footprint is 70 inches wide, 16 inches deep, and 24 inches tall, sized for TVs up to 78 inches. Tape that rectangle against the wall before it arrives.

• Low, wide rustic silhouette

  The stand runs long and low, just 24 inches tall against 70 inches of width, with a plank grooved door on either side of an open center bay. Tapered block feet and a weathered rustic oak grain carry the look through every angle.

• Assembly at home, two people

  This stand ships flat and requires assembly, with two people recommended for the build since the case runs 70 inches long. The included hardware and screws are all you need; a screwdriver is the only tool to have on hand.

• Anchor it to the wall

  A stand this long and low can still tip over if it is climbed on or pulled from the top edge. Anchor it to a wall stud once it is assembled, especially if children are in the home. A tipover restraint kit is not confirmed in the box, so use your own strap or bracket to secure it.

• 150 pounds on top

  The top surface holds up to 150 pounds, enough for a large TV and a soundbar together. The two adjustable interior shelves behind the cabinet doors do not have a separate published weight rating, so keep what you store on them modest and spread the load evenly rather than stacking it all on one shelf.

• TVs up to 78 inches

  The top surface is sized for televisions up to 78 inches, and a cutout at the back routes power and HDMI cables out of sight instead of draping down the front. The open center shelving holds a media box or gaming console within reach of the cable opening, while the two side cabinets close on a magnetic catch to hide everything else.

• Manufactured wood, rustic oak

  The case is built from manufactured wood in a warm, rustic oak finish with a knotty, weathered grain across every surface. Each cabinet door carries a black metal bar pull and a dark, exposed hinge that echoes the reclaimed look, with a magnetic catch holding the door shut.

• Wipe with a dry cloth

  Dust the wood surfaces regularly and wipe spills right away with a soft, barely damp cloth, since manufactured wood swells if water sits on it. Avoid household cleaners with ammonia or bleach on the finish, and use a dry cloth on the black hardware to keep it from dulling.

• Ships flat, assembly required

  The stand ships flat in one or more cartons with the panel pieces, both cabinet doors, hardware, and screws included, along with assembly instructions. A tipover restraint kit is not included, so plan to provide your own anchor strap if you want one.

Good to know

• Tape a 70 by 16 inch rectangle against the wall before it arrives.
• Fits TVs up to 78 inches, per the listed spec.
• At 96 pounds, plan on two people to place it.
• Required. The manufactured wood frame is joined with cam bolts; plan on two people and a screwdriver, and avoid power tools. The included screws are the only hardware needed.
• Tables, benches, rugs, plants, and other room pieces shown are styling only. The TV stand is the product.