Varnholt Oyrarbakki Corner Cabinet

A 32.25 inch wide corner cabinet in black, with fretwork glass doors, antique bronze hardware, and two adjustable interior shelves.

Overall size is 30 inches high, 32.25 inches wide, and 16.75 inches deep across the front edges. It is built to fill a room corner, so measure both walls first.

• Corner-Fit Silhouette

  The case tapers to a mitred point at the top so it can sit flush into a room corner instead of floating out into the room. Two doors carry a black fretwork lattice over dark glass, closing with a pair of small oval antique-bronze knobs with a warm gold tone at the center.

• Built To Fill A Corner

  Overall size is 30 inches high, 32.25 inches wide and 16.75 inches deep across the front edges, with the back cut to meet two walls at an angle. Measure both walls where the corner meets before it arrives, since the depth runs only along the front face.

• Screwdriver-Only Assembly

  Assembly is required at home, and the only tool called for is a screwdriver, no drill or power tools needed. Two people are suggested for the job since the case is awkward to hold upright alone while the doors and hardware go on.

• Anchor It To The Wall

  A tipover restraint device ships in the box. Anchor it to a wall stud once the cabinet is set into its corner, since a case this tall and narrow can tip if it is pulled on or climbed, especially once the shelves are loaded.

• 50 Pounds Per Shelf

  The two interior shelves are each rated to hold 50 pounds and adjust up and down inside the case, so you can space them for taller serving pieces or shorter stacks of dishware and decor. Keep heavier items on the lower shelf for a steadier stance.

• What Fits Behind The Doors

  Interior space measures 25 inches high, 26.75 inches wide and 14.75 inches deep, enough for serving pieces, small appliances, or general living room storage kept out of sight. The adjustable shelves mean the opening can be split evenly or left tall for one bigger item.

• Manufactured Wood, Black Finish

  The top, base and doors are manufactured wood finished in a matte black that reads consistent across every surface, not a wood grain look. Hardware is a pair of oval antique-bronze knobs with a warm gold tone, and the fretwork lattice on each door sits over a panel of dark glass.

• Caring For The Black Finish

  Dust the fretwork lattice with a dry cloth or a soft brush to get into the cutout pattern, and wipe the flat surfaces with a barely damp cloth. Clean the glass panels behind the doors the same way you would any glass, and skip abrasive cleaners on the black finish.

• What's In The Box

  The cabinet ships in one 39 pound carton with the panels, doors, adjustable shelves and tipover restraint hardware included, plus step by step instructions. It carries a limited 90 day warranty against defects, and the back is finished to match the front for a clean look from any angle.

Good to know

• Tape a 32.25 by 16.75 inch triangle into the corner; the top overhangs the base slightly.
• Interior shelf space is 25 by 26.75 by 14.75 inches behind the two glass-paned doors.
• At 39 pounds it ships in one carton; plan on two people for the assembly and the lift.
• Each shelf is listed to hold 50 pounds, with two adjustable shelves behind the doors.
• Required at home. A screwdriver is the only tool needed; two people make the lift and the final assembly easier.
• Rug, curtains, doorway, plant, lamp, table, wall paint, and other decor shown are styling only. The cabinet is the product.