Wulfern Keros Acacia 3-Piece Bistro Set

A three piece bistro set in solid acacia: two slat back armchairs with cream cushions and a round 27.5 inch table, rated to 300 pounds per seat.

You get a round table and two armchairs, scaled for a balcony, a landing, or a corner of the deck. The table stands 29.5 inches high and 27.5 inches across, which holds two plates and two glasses without crowding, and the chairs tuck close enough to pass the salt.

• A table set for two

  You get a round table and two armchairs, scaled for a balcony, a landing, or a corner of the deck. The table stands 29.5 inches high and 27.5 inches across, which holds two plates and two glasses without crowding, and the chairs tuck close enough to pass the salt.

• Slats, arches and grain

  Every piece is solid acacia in a warm teak tone that leaves the grain and its darker streaks visible. The chair backs are open horizontal slats, each arm sweeps down into a crossed brace at the side, and the round top is laid in a radial slat pattern inside a banded rim.

• What the assembly takes

  Assembly is required at home, and the source lists two people for the job. Every tool you need is packed in the carton, so nothing extra has to be bought before you start. Build the two chair frames first, then the table base, and check the screws again after the first week.

• Care and the off season

  Wipe the wood with a damp cloth and let it dry. Take the cushions off when the set is not in use and keep them somewhere dry, and store them indoors through the winter in a warm dry place. The covers unzip, so they come off for cleaning at the end of the season.

• How the seat sits

  Seat height is 17.52 inches before the cushion goes on, close to an indoor dining chair. Each chair measures 24 inches wide and 27.25 inches deep, with arms set at a height that still lets you pull in to the table. The cream cushion is foam filled and softens the slatted seat.

• Built for the weather

  The frames are solid acacia, a dense hardwood, and the set is listed as weather resistant and rust resistant. Cushion covers are polyester over foam fill. Acacia used outdoors holds its warm teak tone longest when the set sits under cover in heavy weather rather than in standing rain.

• 300 pounds per seat

  Each chair has a listed weight capacity of 300 pounds. That figure is per seat rather than a total for the set, and both chairs support the same load. The table is sized for plates, glasses and a small planter, so use it as a surface and not as a step or a seat.

• What arrives in the box

  Three pieces ship: two armchairs and one round table, plus the two cream seat cushions. The shipment weighs 80 pounds in total, with each chair at 15 pounds and the table at 14 once built. It travels by ground carrier in cartons that carry through a standard doorway.

Good to know

• Tape a 27.5 inch circle for the table, then 24 by 27.25 inches for each chair.
• Seat height is 17.52 inches bare; the table top sits 29.5 inches off the ground.
• Leave room to pull both chairs back. It suits a balcony or a corner of a deck.
• Required at home. Two people for the build. All tools are included.
• The set includes two acacia armchairs, one round table, and two cream cushions. Plants, pots, rugs, and other room pieces are styling only.