Wulfern Ofidousa HDPE Adirondack Chair

A single black HDPE patio lounge chair with a sloped three-beam back, flat-top arms, and flared rear legs. Rated to 350 pounds and cleaned with soap and water.

One chair ships in this order: a low, deep seat with a sloped back made of three wide beams, flat-top arms, and flared rear legs that balance the angled seat. The solid black finish runs through the recycled HDPE rather than sitting as a surface coat, so the color stays even across the arms, seat, and back.

• Classic patio silhouette

  One chair ships in this order: a low, deep seat with a sloped back made of three wide beams, flat-top arms, and flared rear legs that balance the angled seat. The solid black finish runs through the recycled HDPE rather than sitting as a surface coat, so the color stays even across the arms, seat, and back.

• Assembly at home

  Assembly is required and listed for one person, with the tools included in the carton so there is nothing extra to buy. Follow the instructions with hand tools; skip a power drill so the hardware does not strip. Once built, the chair is ready to place on a patio, deck, or porch.

• Built for the weather

  The frame is high-density polyethylene with UV protectant and color continuous through the material, so it does not need painting or waterproofing. The spec sheet lists weather, water, UV, rust, and fade resistance, and the chair is built for hot sun, snowy winters, and strong coastal winds. Wipe it down when it needs a refresh; leave it outside without a yearly seal.

• Comfort in the seat

  The seat sits 13.68 inches off the ground with a 20.5 by 17.5 inch seat and a 29 inch back from seat to top, so you recline rather than sit upright at a dining table. Wide flat-top arms at 22 inches high give a stable spot for a mug or a book, and the slatted seat and back let air move on warm days.

• Weight capacity

  The chair is rated to hold up to 350 pounds. The finished piece weighs about 34 pounds, light enough for one person to move across the patio without help, while still feeling planted once you sit back into the rake.

• Care and off-season

  Clean with soap, water, and a soft bristle brush when pollen or dirt builds up. No staining, sealing, or painting is required. You can leave it outside year round thanks to the weather-resistant HDPE, but storing it dry over the wettest months keeps the hardware from sitting soaked season after season.

• What ships

  The carton includes one black outdoor lounge chair plus the assembly tools and hardware. Cushions, a side table, and a cover are not included; bring your own if you want a padded seat or rain protection. Color on this listing is Black.

• Warranty

  A limited warranty covers the chair for 20 years of residential use and 3 years of commercial use. Keep your order confirmation so a claim has the purchase record attached.

Good to know

• Tape a 29.25 by 32.13 inch rectangle; that is the chair footprint.
• Seat height is 13.68 inches. Check that against the table you already own.
• The chair weighs about 34 pounds. One person can assemble and move it.
• Cushions are not included.
• Required at home. Listed for one person. Tools are included.
• One black HDPE Adirondack chair is included. Planters, tables, rugs, plants, walls, and the doorway are styling only.