Wulfern Zaforas Sunbrella Market Umbrella

A 9 foot octagonal market umbrella in Navy Sunbrella fabric, opening on a crank lift with tilt and a powder-coated aluminum pole with eight steel ribs.

The canopy opens to about 9 feet across and stands roughly 8 feet tall, an octagonal footprint that covers a typical round or square patio table and its chairs. Navy Sunbrella reads clean and deep against most outdoor furniture.

• Octagonal market shade

  The canopy opens to about 9 feet across and stands roughly 8 feet tall, an octagonal footprint that covers a typical round or square patio table and its chairs. Navy Sunbrella reads clean and deep against most outdoor furniture.

• Sunbrella that lasts

  The canopy is acrylic Sunbrella fabric with strong UV protection, plus mold, mildew, water, and weather resistance built in. Solution-dyed yarns help the Navy tone hold through seasons of sun rather than washing out after one summer.

• Crank lift and tilt

  A crank at the pole raises and lowers the canopy without wrestling ribs by hand. The tilt control then angles the shade so late-afternoon sun does not sneak under the edge while you are still at the table.

• Aluminum pole, steel ribs

  The pole is powder-coated aluminum at 1.5 inches across, paired with eight powder-coated steel ribs that spread the canopy. The build stays light enough to move, yet stiff enough to keep the octagon from sagging when open.

• Vent for airflow

  A crown vent at the peak lets warm air escape so the space under the canopy stays cooler on still days. It also reduces sail effect a little when a light breeze moves through the patio.

• What ships and what does not

  You receive the canopy and the two-piece pole with crank and tilt hardware. A weighted base, stand, table, and cover are sold separately. Plan the base size for a 9 foot market umbrella before the first windy afternoon.

• Care between seasons

  Brush off debris and spot-clean the canopy with mild soap and water. Let it dry fully before closing. Use the self-adhering strap when stored, and close the umbrella in high wind rather than leaving it open overnight.

• Setup at home

  Assembly is partial and tool free for one person. Join the pole sections, seat the canopy on the hub, and open with the crank. Confirm the 1.5 inch pole fits your table hole or stand before you tighten anything down.

Good to know

• Canopy spans about 108 inches across; measure that against your table and chairs.
• Pole is 1.5 inches thick; confirm it fits your table's umbrella hole first.
• No base included; add a weighted base sized for a 9 foot market umbrella.
• Partial and tool free. One person can finish setup at home; join the pole sections, mount the canopy, and open with the crank.
• Outdoor furniture, plants, and architecture shown are styling only. This umbrella includes the canopy and pole; a base or a table with a matching umbrella hole is required and sold separately.