Wagon Wheel Chandelier, Weathered Oak and Slate Gray Metal, Clear Glass Shades

Wagon wheel chandelier with a distressed weathered oak finish and slate gray metal sloping arms. It holds cylindrical clear glass shades and mixes rustic and industrial styling. The fixture is made of metal, wood and steel, and the finish is hand distressed.

Dimensions: Body 29.5 in H x 30.5 in W x 30.5 in D. Overall maximum height 91.5 in. Suspension and chain length 60 in. Canopy 1.25 in H x 5 in W. Each shade 7 in H x 4 in W x 4 in D. Weight 23 lb.

Named rooms for this chandelier are a foyer, a living room, or over a dining room table.

• Hardwired, 120 volt, single tier with ambient light.
• Uses standard A19 bulbs with an E26 base, up to 60 watts per bulb.
• Dimmable. Damp location rated.
• Hung by chain, and the length is adjustable. Compatible with a sloped ceiling.
• Installation is required. Assembly is needed, and additional tools are required and not included.

• Wood ring, iron arms

  Six slate grey metal arms rise from a round, distressed oak ring to meet at a single point below the chain, each arm topped with a clear hammered glass cylinder. The shape reads like a wagon wheel turned upright, more open framework than a solid fixture.

• The light it throws

  Lit, six bare-look bulbs glow through hammered glass, so the texture scatters the light instead of a clean beam, giving a warm flicker-like shimmer around the ring. Expect ambient light spread wide over a table, not a bright, even downlight.

• Six E26 bulbs, not included

  Each of the six arms takes a standard E26 medium base bulb, sized A19, 60 watts max, and none ship with the fixture. The copy calls it dimmable, but that only works if you add a dimmable bulb and wire the circuit to a separate dimmer switch, both sold on their own.

• Cleaning the glass and metal

  Wipe the hammered glass cylinders and the metal arms with a soft, dry cloth to clear dust without scratching the texture. Skip household glass cleaner on the distressed finish, since it can strip the worn look the metal is meant to have.

• Adjustable chain, sloped ceiling ready

  It hangs from a 60 inch chain at a round canopy, not a fixed rod, so an installer can shorten it to the height you want, up to about 91.5 inches overall. The canopy is sloped-ceiling compatible if your dining room ceiling angles.

• Hardwired with assembly required

  This is a hardwired fixture, not a plug in lamp, so it wires into a ceiling junction box and needs an electrician to make the connections. The ring and arms also need assembly first, bolted together with an Allen wrench, pliers, and a screwdriver before it goes up.

• Damp rated, not wet rated

  This fixture is damp-rated and ETL listed, which covers a bathroom outside the shower spray or a covered porch. It is not wet-rated, so keep it away from direct rain or standing water even in a covered outdoor spot.

• What ships in the box

  The wood ring, metal arms, glass cylinders, chain, and canopy all ship in the box, unassembled and ready to bolt together. Bulbs are not included, so budget for six E26 A19 bulbs, plus a dimmer switch if you want the dimming feature to work.

Good to know

• The wheel is 30.5 inches wide; measure the table or island it will hang over.
• A 60-inch chain sets hang height up to 91.5 inches overall.
• Damp-rated for a bath or covered porch; it is not a wet-location fixture.