Tessmar Lambi Tufted Velvet Wingback Chair
4.4In stock
Sold out. Email me when it’s back.
Delivery details
Free ground shippingGround shipping is not available to this ZIP code. Contact us for a quote.
Get it by
Delivery method
Details
A 29.25 inch wide wingback chair in orange velvet, with diamond button tufting, gold metal legs, and a 500 pound seat rating.
The listed footprint is 36.5 inches high, 29.25 inches wide, and 27.5 inches deep. Tape that rectangle before you place it, since the flared wings sit in the full 29.25 inch width.
- Tall wings, a rounded seat
The back rises into two tall, pointed wings that taper up and outward past the headrest line, then sweeps down into rounded, recessed arms lower than the back itself. At 29.25 inches wide and 27.5 inches deep, the whole shape reads as one continuous curve from the top of the wings down to the front of the seat cushion, rather than a boxy frame with arms added on.
- Diamond tufting, gold legs
Button tufting runs in a diamond zigzag down the center of the back, stitched into the velvet rather than printed on, which is what gives the back its shape and definition. Below the seat, four thin, splayed legs in a gold metal finish stand 9.5 inches high, a sharp contrast to the soft velvet above them and the detail most people notice first.
- Assembly is just the legs
Assembly is the four legs: they attach at home into threaded mounts under the seat frame, using the hardware that ships with the chair. No separate tools are needed beyond a screwdriver. The back, arms, and seat all arrive fully upholstered and built, so there is no frame or fabric work left to do once the legs are on.
- Dry clean the velvet
Velvet takes different care than most fabrics: spot clean it with a dry, solvent-based cleaner rather than water or a wet cloth, which can leave rings and flatten the pile. Blot instead of rubbing, and vacuum lightly with a soft brush attachment in the direction of the nap to lift dust without crushing the fibers. When in doubt, call a professional upholstery cleaner rather than experimenting on it yourself.
- Framed in, not lounging
The seat cushion is 20.25 inches deep and sits 17.5 inches off the floor, with high-density foam over a combination of bungee and sinuous springs underneath for support. It has enough give to sink in a little without bottoming out, rated to 500 pounds. The wing shape of the back keeps you framed in when you lean back, more upright than an open lounge feel.
- Measure the doorway first
The assembled chair is 29.25 inches wide, 27.5 inches deep, and 36.5 inches high, narrow enough for most interior doors, but measure your doorway and any stairwell turn before it arrives. It ships with the legs detached, so the upholstered body, back, arms, and seat in one piece, is what has to clear the opening, while the legs and hardware travel separately and attach once it is inside the room.
- Wood and metal frame
The frame combines manufactured wood with metal for strength where the legs mount. Fill is high-density foam, about 1.5 pounds per cubic foot, layered over a combination of bungee cord and sinuous springs rather than foam alone, so the cushion resists sagging and bottoming out over years of sitting rather than just the first few months.
- Orange velvet upholstery
The upholstery is velvet in a bold orange, a woven pile fabric with a soft, slightly reflective nap that shifts in tone depending on which way the light and your hand brush across it. It is not a performance weave built for heavy scratching from pets, so keep claws off it if you can. The diamond tufting is stitched through the velvet itself, not a separate overlay.
- One chair, legs separate
What ships is one chair: the upholstered body, back, arms, and seat cushion built and finished, plus the four gold legs and their mounting hardware packed separately and not yet attached. No ottoman, no pillow, and no second chair come with it: this listing is for a single wingback chair. Everything needed to attach the legs is included in the box.
Good to know
- Tape a 29.25 by 27.5 inch rectangle; the flared wings use the full width.
- Seat height is 17.5 inches. Confirm that against the tables you already own.
- At 28.5 pounds it is one-person to unbox, then four legs go on.
- Keep 500 pounds in mind if two people will share it now and then.
- Attach the four 9.5 inch gold metal legs. The chair body arrives assembled except for those legs.
- Sold as one orange velvet wingback chair with four gold metal legs. Side tables, rugs, plants, books, curtains, and other room pieces are styling only.
Specifications
- Product type
- Wingback chair
- Overall
- 36.5″ H × 29.25″ W × 27.5″ D
- Seat
- 17.5″ H × 17″ W × 20.25″ D
- Seat back
- 16.5″ H
- Legs
- 9.5″ H, gold metal
- Upholstery
- Velvet, orange
- Frame
- Manufactured wood and metal
- Fill
- Foam over bungee and sinuous springs
- Foam density
- 1.5 lb/cu ft
- Weight capacity
- 500 lb
- Product weight
- 28.5 lb
- Assembly
- Yes; legs attach at home
- Care
- Spot clean with dry, solvent-based cleaner
- Warranty
- 30 day limited
Delivery & returns
Free ground shipping
Dispatched in 1–2 business days, then 1–3 in transit. Tracking emailed the day it leaves us.
Contiguous 48 states, street addresses only. No PO boxes or APO/FPO.
Free returns within 30 days
Unused, unassembled, and in its original packaging. Email us and we send a prepaid FedEx label or schedule a pickup. No restocking fee.
Damaged on arrival? Send photos to customerservice@tloom.com within 7 days for a free replacement or refund.
Tessmar Lambi Tufted Velvet Wingback Chair
Click image to zoom
Side by side
Compare similar accent chairs
Prices and ratings as shown on each product page.
| Product |
This itemTessmar
Lambi Tufted Velvet Wingback Chair |
|---|---|
| Price |
$505.00
|
| Rating | |
| Product type | Wingback chair |
| Overall | 36.5″ H × 29.25″ W × 27.5″ D |
| Seat | 17.5″ H × 17″ W × 20.25″ D |
| Seat back | 16.5″ H |
| Legs | 9.5″ H, gold metal |
| Upholstery | Velvet, orange |
| Actions | Viewing |
Finish the setup
Goes with it
Pieces that pair with this accent chair.
No reviews match those filters.
Same category