Grevane Talmine Footboard Wingback Bed

A wingback bed with a tailored footboard. The rectangular headboard curves in at the sides, upholstered in a natural, textured linen, and the frame sits on dark tapered feet.

Solid and manufactured wood make up the frame, with center support legs running beneath the mattress area. Home assembly is required; a specific tool list isn't published, so keep a standard screwdriver set on hand.

• Natural textured upholstery over a solid and manufactured wood frame
• Wingback, rectangular headboard with a matching footboard
• Center support legs beneath the mattress area
• Assembly required at home

Offered in Twin, Full, Queen, King, California King.

• A flat panel, rolled edge

  The headboard stays flat and plain across the face, no tufting or channel lines, with its outer edges rolled into a smooth curve where each wing turns. A matching footboard in the same warm, textured fabric closes the foot of the frame, giving the whole bed one continuous line.

• Assembly, basic tools

  Assembly is required, and a specific tool list is not published for this one, so keep a standard screwdriver and wrench set on hand rather than counting on everything arriving in the box. Build the frame in the room where it will stay, before the mattress arrives.

• No slats, box spring required

  This bed ships without a slat kit, and a box spring is required underneath the mattress, unlike a platform design that needs neither. Center support legs run beneath the mattress area for stability, but they support a box spring and mattress together, not a mattress alone.

• Twin through California King

  Five sizes span the range: Twin, Full, Queen, King and California King. Twin measures 44 inches wide and 80 long; at the other end, California King runs 77 inches wide and 89 long. Full, Queen and King sit between those two, each stepping up in width as the mattress size grows.

• 55 inches, every size

  Every size of this bed stands the same 55 inches tall, so the headboard height never changes even as the footprint grows from Twin to California King. Underbed clearance is not published, but the frame sits low and close to the floor on short block legs, closer to a platform look than a tall four poster.

• Textured fabric, certified wood

  The upholstery is a natural, textured fabric in a warm greige tone, without any sheen, wrapped over a frame that mixes solid and manufactured wood. The wood frame carries FSC certification for sustainable sourcing, and the linens on the bed carry GREENGUARD certification for indoor air quality.

• No published weight rating

  A weight rating is not listed for this bed. Support comes from the center legs beneath the mattress area and the box spring you add beneath the mattress, so plan around your mattress and foundation's own weight guidance rather than a specific number here.

• Spot clean only

  This upholstery is spot clean only, a step more careful than a wipe down with a dry cloth. Treat a mark right away with a fabric safe cleaner and a light touch, test it on a hidden patch first, and skip soaking the fabric or scrubbing it hard.

• What ships, and what doesn't

  The box includes the headboard, the matching footboard and the frame with its center support legs, plus what hardware is needed to bolt them together. No slat kit ships with this bed, and neither the box spring nor the mattress is included, so budget for both separately.

Good to know

• Queen measures 65″ W × 85″ L; leave clearance on the sides you use to get in and out.
• Every size stands 55″ tall. Check sill height and wall-mounted lighting before delivery.
• California King measures 77″ W × 89″ L; walk your hallway turns before it arrives.
• Required at home. A specific tool list isn't published, so keep a standard screwdriver set on hand and give yourself a clear workspace before the mattress comes in.
• This listing includes the upholstered bed frame with headboard, footboard and rails. Mattress, bedding, nightstands, rugs, lamps and other room decor are styling only.