Wulfern Filizi Woven Wicker Bar Stools, Set of 2

A pair of bar-height stools woven in multi-tone dark brown resin wicker over a powder-coated iron frame. Seat height 29.9 inches.

This listing is for two matching bar stools, not one. Both arrive in the same dark brown weave, so a bar or pub table seats two without hunting down a second stool later. Order a second set if you need four seats along the counter.

• A pair, not a single stool

  This listing is for two matching bar stools, not one. Both arrive in the same dark brown weave, so a bar or pub table seats two without hunting down a second stool later. Order a second set if you need four seats along the counter.

• Bar height, not counter height

  The seat sits 29.9 inches off the ground. That is true bar height, sized for a bar or pub table with a 41 to 43 inch top. Measure your table before ordering: a standard 35 to 39 inch kitchen counter wants a shorter 24 to 27 inch stool, and these will sit too high for it.

• Iron frame under the weave

  Every tube is powder-coated iron, wrapped strand by strand so the metal never shows. Four legs are braced by two square footrest rails, which is what keeps a tall stool from racking side to side when someone leans back. Each stool is rated to support 300 pounds.

• The weave and its color

  Seat, back and arms are flat-strand polyethylene wicker in a multi-tone dark brown. Espresso, chocolate and near-black strands run together, so the surface reads deeper than a flat printed brown and hides pollen and dust between cleanings.

• How it sits

  The seat measures 18 inches wide by 18.5 inches deep, with a full 17 inch back that rises to a squared top edge and a curved arm on each side. Owners describe it as roomy rather than perched. The overall footprint is 24.8 inches wide by 25.35 inches deep.

• Assembly, made easier

  Assembly is required and the tools come in the box. Two people go faster than one, and owners report roughly half an hour per stool. Start every bolt loosely before you tighten any of them so the arm and seat holes line up, then finish by hand rather than with a power driver.

• Weather and care

  The resin weave and the powder-coated frame are built to shrug off mild weather, and a wipe with a damp cloth is the only routine care they need. For heavy rain, snow or a long stretch of direct sun, cover them or move them under shelter, and store them inside over winter if you can, the same as any woven outdoor seat.

• Where a pair works

  Two of these read well pulled up to an outdoor kitchen island, a rail-height balcony counter or a tall bistro table. The footprint is narrower than a lounge chair, so a pair fits on a small balcony where two Adirondacks would crowd it.

• What ships

  Two bar stools arrive with the hardware and the tools to build them. No cushions are included on this set: seat and back are woven surfaces, so nothing has to come inside when it rains. Seat pads are an easy aftermarket add if you want one.

Good to know

• Bar height: the 29.9 inch seat is built for a 41 to 43 inch bar or pub table.
• Too tall for a 35 to 39 inch kitchen counter, which wants a 24 to 27 inch seat.
• Tape two 24.8 by 25.35 inch rectangles; that is one stool each, arms included.
• Allow at least the 24.8 inch stool width of bar edge for each seat.
• Required at home. Two people recommended. All tools are included. Do not use power tools.
• Two matching dark brown bar stools ship in this set. Bar counters, planters, walls, and other furniture are styling only.