Grevane Handa Linen Wingback Bed

Grevane Handa Linen Wingback Bed. A neutral greige woven linen wraps a wingback frame, with slim wings that turn forward at each edge and an untufted face that lets the weave read clearly. The frame requires a box spring beneath the mattress; add the box spring height to your mattress height to know the finished sleep surface.

Solid and manufactured wood form the frame, pine specifically, set on center support legs with basic butt joinery. Twin, Full/Double, Queen, King, and California King sizes each stand 56 inches tall with 4 inches of clearance beneath the frame. The bed carries FSC MIX and GREENGUARD certifications. Home assembly is required, one person suggested, with a flat-head and a Phillips screwdriver driven by hand.

• Smooth linen, subtle wings

  The headboard face stays smooth and untufted, so the greige linen's flecked weave does the work instead of buttons or channels. Slim wings turn forward at each side rather than wrapping in a deep curve, giving a tailored edge without a heavy, enclosed feel. No footboard breaks the line at the foot of the bed.

• Hand tools only

  Assembly calls for a Phillips head screwdriver and nothing motorized: the spec sheet lists power tools as something to avoid rather than use. The frame goes together with basic butt joinery at the joints, so lining up each panel carefully before you drive the screws home makes for a straighter, sturdier result.

• No slats, box spring required

  This frame ships with no slats included, and it needs a box spring underneath the mattress rather than a slatted deck. Center support legs with basic butt joinery hold the middle of the frame steady, so set the box spring squarely on the rails before the mattress goes on top.

• Twin through California King

  This wingback frame is offered in Twin, Full or Double, Queen, King, and California King, each size built to its own mattress rather than one frame stretched to fit several. Measure the mattress you plan to use against the size you order, since the rails and center wings are sized specifically for that one mattress footprint.

• Tall headboard, tight underbed gap

  Overall height runs 56 inches from floor to the top of the headboard, so this frame reads tall behind the pillows rather than low profile. Underbed clearance is just 4 inches, not enough for large bins, and the smooth wings add depth at the head end, so leave clearance from a window or a sloped ceiling behind the headboard before you place it against a wall.

• FSC pine, GREENGUARD linen

  The frame is solid and manufactured pine, certified FSC MIX for the wood sourcing, built with basic butt joinery at the joints rather than dowels or brackets. Neutral greige linen upholsters the headboard and wings in a woven, flecked texture, and the linen itself carries a GREENGUARD certification for indoor air quality.

• No published weight rating

  This frame does not carry a published weight capacity number, so there is no figure to promise here. What does carry the load is the center support legs under the frame and the box spring beneath the mattress, both part of the structure rather than an add-on, so keep both in place for full support.

• Spot clean the linen

  This upholstery is spot clean only, so treat a spill right away by blotting rather than rubbing, then dab the area with a mild, water based cleaner and a clean cloth. Skip the washing machine and any steam cleaner, and vacuum the linen on a low, brush free setting to clear dust from the weave between spot cleanings.

• What ships, what you add

  The headboard, side rails, and center support legs ship together with the screws and other hardware included, ready for one person to assemble with a Phillips screwdriver. No slats come with the frame, and a box spring is not included, so budget for one along with the mattress and bedding shown in photos.

Good to know

• Queen is 67″ wide by 85″ long. Leave clearance on the sides you use most.
• All five sizes stand 56″ tall; check windows, art, and sloped ceilings.
• California King reaches 89″ long. Measure doorways and stair turns before delivery.