Grevane Sunart Low Profile Wingback Bed
4.7In stock
Sold out. Email me when it’s back.
Delivery details
Free ground shippingGround shipping is not available to this ZIP code. Contact us for a quote.
Get it by
Delivery method
Details
A wingback that sits low enough to keep the light. The headboard curves in at the shoulders while the frame stays close to the floor, so the window behind the bed keeps its view and the wall above it reads taller. In a small room this is the piece you notice, at eye level instead of overhead.
Velvet upholstery over a frame of solid and manufactured wood with plywood and laminate board. A manufactured wood slat kit ships with the headboard and carries the mattress on its own, so there is no box spring to buy or store.
- Velvet upholstery; solid and manufactured wood, plywood and laminate board frame
- Manufactured wood slat kit and headboard included
- Box spring required: No
- Weight capacity: 500 lb.
- Overall length: 80''
- Assembly required: Yes
Offered in Twin, Full/Double, Queen.
- Wings that fold forward
The headboard rises in tall, even channels of cream velvet, bordered by a smooth strip along the top with a wing folding forward at each side. Splayed, tapered legs in light wood hold the frame close to the floor, giving the whole piece a settled, mid-century weight.
- About an hour to build
Assembly is required, and the tools ship in the box so there is nothing to source first. Plan on 1 to 1.5 hours: the headboard goes together first, then the slat kit and its center support legs drop into the frame.
- Slats, no foundation needed
Manufactured wood slats sit about 4.5 inches apart across 5 center support legs, and the mattress rests directly on them, no box spring and no separate foundation. This frame is not built to pair with an adjustable base, unlike some other platform designs, so a standard mattress is the match here.
- Twin, Full/Double or Queen
The frame comes in three sizes: Twin, Full/Double and Queen. Twin publishes a full set of numbers, 40.1 inches wide, 78.7 inches long and 37.1 inches to the top of the headboard; Full/Double and Queen publish only their 80 inch length, so measure your own mattress and room for the width on those two.
- 6.8 inches, a short drop
From the floor to the bottom of the side rail is 6.8 inches, so there is only a slim gap underneath, not real storage space. Because the rails sit this low, a tall mattress will show more of its own side above the frame than it would on a bed with deeper rails, and getting in or out is a short, easy drop rather than a step up.
- Velvet over eucalyptus wood
The upholstery is a cream velvet over the whole frame, and underneath, the wood is solid and manufactured, including eucalyptus, plywood and laminate board. Splayed legs in a light brown finish are shaped from the same wood family, tying the tone together from floor to headboard.
- 500 pounds, every size
Weight capacity holds at 500 pounds across Twin, Full/Double and Queen alike, carried down through the 5 center support legs under the slats. That figure covers the mattress, bedding and sleepers together, not anything extra piled on top of the bed.
- Wipe clean, keep it dry
Wipe the velvet with a dry cloth for everyday dust, working in the direction of the pile so it does not crush unevenly. Blot any spill right away instead of rubbing it in, and keep the fabric away from direct, prolonged sun, which can fade light colors over time.
- What arrives, mattress not included
The box includes the headboard, the frame rails, the splayed legs, the center support legs and the manufactured wood slat kit, along with the tools to put it together. A mattress is not included and is not compatible with an adjustable base, so plan on a standard mattress underneath it.
Good to know
- Height and width are published for Twin only. Full/Double and Queen list 80″ long.
- The rail's underside clears the floor by 6.8″. Expect a low sit and shallow storage.
- Not compatible with an adjustable base. The included slat kit is the foundation.
- Required, tools included
- The bed frame includes the upholstered headboard, footboard, side rails, legs, center supports, and slat kit. Mattress, bedding, lamps, nightstands, rugs, plants, and other room pieces are styling only.
Specifications
- Upholstery
- Cream velvet
- Frame
- Solid and manufactured wood (eucalyptus) with plywood and laminate board
- Slats
- Manufactured wood, 4.5″ spacing, 5 center support legs
- Weight capacity
- 500 lb. on every size
- Dimensions
- Twin 37.1″ H × 40.1″ W × 78.7″ L · Full/Double and Queen publish length only, 80″
- Floor clearance
- 6.8″ from floor to bottom of side rail
- Box spring
- Not required. Not compatible with adjustable bases
Delivery & returns
Free ground shipping
Dispatched in 1–2 business days, then 1–3 in transit. Tracking emailed the day it leaves us.
Contiguous 48 states, street addresses only. No PO boxes or APO/FPO.
Free returns within 30 days
Unused, unassembled, and in its original packaging. Email us and we send a prepaid FedEx label or schedule a pickup. No restocking fee.
Damaged on arrival? Send photos to customerservice@tloom.com within 7 days for a free replacement or refund.
Grevane Sunart Low Profile Wingback Bed
Click image to zoom
Side by side
Compare similar beds
Prices and ratings as shown on each product page.
| Product |
This itemGrevane
Sunart Low Profile Wingback Bed |
|---|---|
| Price |
From $173.99
|
| Rating | |
| Upholstery | Cream velvet |
| Frame | Solid and manufactured wood (eucalyptus) with plywood and laminate board |
| Slats | Manufactured wood, 4.5″ spacing, 5 center support legs |
| Weight capacity | 500 lb. on every size |
| Dimensions | Twin 37.1″ H × 40.1″ W × 78.7″ L · Full/Double and Queen publish length only, 80″ |
| Floor clearance | 6.8″ from floor to bottom of side rail |
| Actions | Viewing |
Finish the setup
Goes with it
Pieces that pair with this bed.
No reviews match those filters.
Same category