Grevane Culnacraig Headboard

An open quatrefoil lattice and distressed gunmetal finish give this iron headboard a graphic focal point, with Full, Queen and King widths for standard bed frames.

A repeating quatrefoil lattice gives the headboard a graphic rhythm, with clean rectangular rails framing the open design. The slim silhouette adds height above the bed without filling the wall with a solid panel.

• Assembly, tools included

  Assembly is required at home, and all tools are included for the job. Mount the headboard to a compatible bed frame with the included mounting hardware, following the supplied installation instructions.

• Dust the open frame

  For everyday care, dust the open iron lattice with a soft, dry cloth so the quatrefoil detailing stays clear. Skip abrasive cleaners on the distressed metal finish, which can change the way its surface reads.

• Height and slim depth

  The headboard stands 59.8″ high and extends 1.3″ deep from the wall. Measure the available wall clearance before mounting, then leave room for the frame connection behind the bed.

• Open-frame iron

  The rectangular headboard uses an open-frame design in iron, finished with distressed metal detailing. Its finished back and legs keep the piece visually complete from the sides, while the gunmetal color brings darker contrast to light bedding.

• Match your bed size

  Choose the Full, Queen or King width that matches your standard bed frame. The published widths are 53.6″, 60.6″ and 76.6″ respectively, with the same 1.3″ depth across all three sizes.

• Your frame supports it

  This listing is a headboard, so it mounts to a compatible standard bed frame rather than replacing the mattress support. Use the frame’s own support system for your mattress, including any foundation or slats your setup requires.

• Use your frame rating

  Use the compatible bed frame’s capacity guidance for the mattress and sleepers. No separate load rating is provided for this headboard, so keep weight on the frame instead of the iron lattice.

• Headboard and hardware

  The package arrives with the headboard and mounting hardware, with all assembly tools included. A compatible standard bed frame, mattress and bedding are part of your setup, so plan the connection and room placement before the headboard arrives.

Good to know

• Full: 53.6″ W × 1.3″ D; allow 59.8″ of wall height.
• Queen: 60.6″ W × 1.3″ D; measure clearance before mounting.
• King: 76.6″ W × 1.3″ D; choose a matching frame.